Beltronics Sti-R Owner's Manual - Page 7

Programming There are 7 user-selectable options so you can customize your STi-R for your own preferences. The buttons labeled VOL/MUTE and SENS are also used to enter the Programming Mode, REVIEW your current program settings, and to CHANGE any settings as desired. Pages 1214 explain each option in more detail. An example Here is how you would turn STi-R's AutoMute feature off. 1 Enter the Program Mode by holding both the VOL/MUTE and SENS buttons down for 2 seconds. The STi-R will beep twice and display Program. How to use Programming 1 To enter Program Mode, press and hold both the VOL/MUTE and SENS buttons down for 2 seconds. (The unit will beep twice, and will display the word Program). 2 Then press the VOL/MUTE button to review the current settings. (You can either tap the button to change from item to item, or hold the button to scroll through the items). 3 Press the SENS button to change any setting. (You can either tap the button to change from setting to setting, or hold the button to scroll through all the options). 4 To leave the Program Mode, simply wait 8 seconds without pressing any button, or press the PWR button. (The unit will display Complete, beep 4 times, and return to normal operation). 2 Then hold the VOL/MUTE button down. The STi-R will scroll through the categories, starting with Pilot (Pilot), Voice (Voice), Power-on sequence (PwrOn), Signal Strength Meter (Meter), AutoMute (aMute), Brightness (Brt), and Bands (Bands). 3 Release the VOL/MUTE button when the STi-R shows the AutoMute item. Since the factory setting is for AutoMute to be on, STi-R will display aMute ON. If you accidentally don't release the VOL/MUTE button in time, and STi-R goes to the next category, simply hold the VOL/MUTE button down again, the STi-R will scroll through all of the categories. 4 Press the SENS button to change from aMute ON to aMute OFF. 5 To complete the Programming, simply wait 8 seconds without pressing any button, or press the PWR button. The STi-R will display Complete, beep 4 times, and return to normal operation. 10 Overview of Programming * Factory Default Settings To reset STi-R to its original factory settings, press and hold the "VOL/MUTE" and "SENS" buttons while turning the power on. The STi-R's display will provide a Reset message, accompanied by an audible alert, acknowledging the reset. Press the VOL/MUTE button to go from one category to the next PILOT (Power-on indication) VOICE POWER-ON SEQUENCE SIGNAL STRENGTH METER AUTOMUTE BRIGHTNESS When KaSW is off, BANDS each Ka segment can be turned on or off Ka1 (33.392 - 33.704) ON or OFF Ka2 (33.704 - 33.896) ON or OFF Ka3 (33.886 - 34.198) ON or OFF Ka4 (34.184 - 34.592) ON or OFF Ka5 (34.592 - 34.808) ON or OFF Ka6 (34.806 - 35.166) ON or OFF Ka7 (34.143 - 35.383) ON or OFF Ka8 (35.378 - 35.618) ON or OFF Ka9 (35.595 - 35.835) ON or OFF Ka10 (35.830 - 35.998) ON or OFF Pilot Pilot Pilot Voice Voice PwrOn PwrOn Meter Meter Meter aMute aMute Brt Brt Brt Brt Brt Bands Bands Press the SENS button to change your setting within a category HWY *Full word:Highway, AutoScan,etc. H Letter:H,A,C,or Cnx V Vehicle voltage ON * Voice alerts on OFF Voice alerts off STD * Standard power-on sequence FST Fast power-on sequence STD * Standard signal strength meter THT Threat Display TEC Tech Display ON * AutoMute on OFF AutoMute off Auto * Automatic brightness Min Minimum brightness Med Medium brightness Max Maximum brightness Dark All dark DFT *Factory default settings MOD Factory default settings modified Turn bands "ON" or "OFF" by pressing and holding the "SENS" button X ON or OFF (default is on) K ON or OFF (default is on) KaSW ON or OFF (default is on) LSR ON or OFF (default is on) SWS ON or OFF (default is off) POP ON or OFF (default is off) RDR ON or OFF (default is on) 11