Beltronics Vector VL 970 Owner's Manual - Page 10

and is designed for use in high density microwave areas. Factory setting is "CTY X ". Note-once "CTY X" or "CTY ALL" is chosen in Selectable Features, the cty button must be pressed to engage your selection. X/K/Ka Band On or Off Select "X o n /X o f f ","K o n /K o f f " or "Ka o n /Ka o f f " depending upon your driving environment and selectivity requirements. This mode is especially useful where falsing may occur and disabling the offending band may be required. Factory setting is on for all three Bands. Auto-Mute On/Off With "A m u t e o n ", unit will provide several X, K, Super Wideband Ka audio alerts.After the audio alerts, a "clicking" tone keeps you quietly informed for as long as the signal is present. This clicking becomes more rapid as the strength of the Radar signal increases."A m u t e o n " enables you to conveniently monitor extended encounters without having to manually mute or adjust the volume setting. With "A m u t e o f f ," unit will provide a continuous series of X, K, Super Wideband Ka and Laser audio alerts. This standard setting is often preferred when background noise in a vehicle is loud. Factory setting is "A m u t e o f f ." Note: because of their urgency, Laser alerts are not affected. Safety Warning System® (sws™) When on, unit will provide a Message when signals from sws™ transmitters are detected. Factory setting is on. Audio/Visual Scroll Rate When "SCRLs l o w " is selected, unit will provide a slow cycling of audio/visual messages.When "SCRLf a s t " is selected, unit will provide a fast cycling of audio/visual messages. Factory setting is "SCRLs l o w . " 