Beltronics Vector VL 970 Owner's Manual - Page 11

Entering Selectable Features Mode 1. With the unit off, press and hold the cty button, then press the pwr button. The word "FEATURES" will appear in the display and a short audible "beep" will sound indicating you are now in the Selectable Features Mode. 2. Immediately after the "beep", the display will show the status of the first Selectable Feature (City X or City All). 3. Press the aud button to make your selection. Press the cty button to move to the next Selectable Feature. Repeat the process until you have made your selection for each Selectable Feature. 4. Press the pwr button to exit Selectable Features mode. Two "beeps" confirm that you have exited this mode and either "HI GHWAY" or "CITY" will be presented in the display, based on your previous selection. Your unit is ready for operation. installation General Guidelines Do not mount your unit directly behind windshield wipers or mirrored sunscreens which block Radar and Laser signals and substantially reduce warning range. Unlike "after market" mirrored sun-screens, regular tinted glass does not affect Radar reception. Radar signals are also reflected by the "heated windshields" known as Instaclear® and ElectriClear® available as an option on some vehicles. This type of windshield makes any dash, visor or windshield mounted detector ineffective. (If in doubt, check with an appropriate dealership to see if this applies to your vehicle.) To achieve optimum performance, regardless of which mounting position you choose, follow the basic steps on the following page: 1. Consider occupant safety when selecting a mounting location. Choose a location where the unit will not be hazardous in case of an accident.  Instaclear is a registered trademark of the Ford Motor Company. ElectriClear is a registered Trademark of Libbey, Owens, Ford, and Delco-Remy.