BenQ MP522 User Manual - Page 36

Setting the presentation timer The presentation timer can indicate the presentation time on the screen to help you achieve better time management when giving presentations. Follow these steps to utilize this function: 1. Press Timer Setup on the remote control or go to the SYSTEM SETUP: Basic > Presentation Timer menu and press Mode/Enter to display the Presentation Timer page. 2. Press to highlight Timer period and decide the timer period by pressing / . The length of time can be set from 1 to 5 minutes in 1minute increments and 5 to 240 minutes in 5minute increments. If the timer is already on, the timer will restart whenever the Timer period is reset. Presentation Timer Timer period Timer display Timer position Timer counting direction Always Top-Left Count Down On Off MENUBack 3. Press to highlight Timer display and choose if you want the timer to show up on the screen by pressing / . Selection Description Always Displays the timer on screen throughout the presentation time. 1 min/2 min/3 min Displays the timer on screen in the last 1/2/3 minute(s). Never Hides the timer throughout the presentation time. 4. Press to highlight Timer position and set the timer position by pressing / . Top-Left Bottom-Left TopRight Bottom-Right 5 min 5 min 5 min 5 min 5. Press to highlight Timer counting direction and select your desired counting direction by pressing / . Selection Count Up Count Down Description Increases from 0 to the preset time. Decrease from the preset time to 0. 6. To activate the presentation timer, press and press / to select On and press Mode/Enter. 7. A confirmation message displays. Highlight Yes and press Mode/Enter to confirm. You will see the message "Timer is On" displaying on the screen. The timer starts counting at the time the timer is on. NOTICE Are you sure to turn on the presentation timer? Yes No 36 Operation