BenQ MP522 User Manual - Page 52
Resetting the lamp timer, SYSTEM, SETUP: Advanced, Lamp Settings, Mode/Enter, Reset lamp, timer, Reset
UPC - 840046019570
View all BenQ MP522 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
9. Tighten the screw that secures the lamp. • Loose screw may cause a bad connection, which could result in malfunction. • Do not over tighten the screw. 10. Ensure the handle is fully laid flat and locked in place. 11. Replace the lamp cover on the projector. 12. Tighten the screws that secure the lamp cover. • Loose screw may cause a bad connection, which could result in malfunction. • Do not over tighten the screws. 13. Restart the projector. Do not turn the power on with the lamp cover removed. Resetting the lamp timer 14. After the startup logo, open the On-Screen Display (OSD) menu. Go to the SYSTEM Notice SETUP: Advanced > Lamp Settings menu. Reset Lamp Timer? Press Mode/Enter. The Lamp Settings page displays. Press to highlight Reset lamp Reset Cancel timer and press Mode/Enter. A warning message displays asking if you want to reset the lamp timer. Highlight Reset and press Mode/Enter. The lamp time will be reset to '0'. Do not reset if the lamp is not new or replaced as this could cause damage. 52 Maintenance