BenQ MP615P DLP Projector User Manual - Page 20

Connecting Video source devices You need only connect the projector to a Video source device using just one of the above connecting methods, however each provides a different level of video quality. The method you choose will most likely depend upon the availability of matching terminals on both the projector and the Video source device as described below: Terminal name HDMI (MP625P only) Component Video S-Video Video Terminal appearance Reference HDMI COMPUTER S-VIDEO VIDEO "Connecting an HDMI source device (MP625P only)" on page 21 "Connecting a Component Video source device" on page 22 "Connecting an SVideo/composite source device" on page 23 Picture quality Best Better Good Normal Connecting audio The projector has one built-in mono speaker which is designed to provide basic audio functionality accompanying data presentations for business purposes only. It is not designed for, nor intended for stereo audio reproduction use as might be expected in home theater or home cinema applications. Any stereo audio input (if provided), is mixed into a common mono audio output through the projector speaker. When you connect audio output signal from a video source device, please set the audio output in dual track to obtain an optimal sound effects. If you have a separate sound system, you will most likely want to connect the audio output of your Video source device to that sound system, instead of to the mono audio projector. The audio connections illustrated on page 18 are provided for informational purposes only. You need not connect audio to the projector if there is an alternate sound system available, or if audio is not required. 20 Connection