BenQ MP615P DLP Projector User Manual - Page 58
Resetting the lamp timer, SYSTEM, SETUP: Advanced, Lamp Settings, Mode/Enter, Reset lamp, timer, Reset
View all BenQ MP615P DLP Projector manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
7. Tighten the screws that secure the lamp. • Loose screw may cause a bad connection, which could result in malfunction. • Do not over tighten the screws. 8. Ensure the handle is fully laid flat and locked in place. 9. Replace the lamp cover by sliding it into place. (a) (b) 10. Tighten the screw that secures the lamp cover. • Loose screw may cause a bad connection, which could result in malfunction. • Do not over tighten the screw. 11. Restart the projector. Do not turn the power on with the lamp cover removed. Resetting the lamp timer 12. After the startup logo, open the On-Screen Display (OSD) menu. Go to the SYSTEM SETUP: Advanced > Lamp Settings menu. Press Mode/Enter. The Lamp Settings page displays. Press to highlight Reset lamp timer and press Mode/Enter. A warning message displays asking if you want to reset the lamp timer. Highlight Reset and press Mode/Enter. The lamp time will be reset to '0'. Do not reset if the lamp is not new or replaced as this could cause damage. 58 Maintenance