BenQ MP620 User Manual - Page 22
To connect the projector to a notebook or desktop computer either through
UPC - 840046014698
View all BenQ MP620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
To connect the projector to a notebook or desktop computer (either through a VGA cable or VGA to DVI-A cable): • With a VGA cable: • With a VGA to DVI-A cable: 1. Take the supplied VGA cable and 1. Take a VGA to DVI-A cable and connect one end to the D-Sub connect the VGA end to the D-Sub output socket of the computer. output socket of the computer. 2. Connect the other end of the VGA 2. Connect the DVI end of the VGA to cable to the D-SUB/COMP. IN DVI-A cable to the DVI-I signal signal input socket on the projector. input socket on the projector. 3. If you wish to make use of the projector (mixed mono) speaker, take a suitable audio cable and connect one end of the cable to the audio output socket of the computer, and the other end to the Audio socket of the projector. The final connection path should be like that shown in the following diagram: Laptop or desktop computer VGA cable or Audio cable VGA to DVI-A Many laptops do not turn on their external video ports when connected to a projector. Usually a key combo like FN + F3 or CRT/LCD key turns the external display on/off. Locate a function key labeled CRT/LCD or a function key with a monitor symbol on the laptop. Press FN and the labeled function key simultaneously. Refer to your laptop's documentation to find your laptop's key combination. 18 Connection