BenQ MX816ST - PRJ Networking Operation Guide - Page 20

Projecting computer screen contents One projector displaying one computer screen 1. Connect the computer to the projector. See "Connecting the projector with your computer" on page 3 for detail. 2. Make sure QPresenter is downloaded and installed. See "Downloading QPresenter" on page 7 and "Installing QPresenter" on page 7 for detail. 3. Open QPresenter by clicking the icon. 4. Type the projector IP address and click Connect. Or you can search for projectors, simply click Search to list all the projectors on the same local area network. Click the desired projector in the Search result list, and click Connect. You can also type a desired projector name and click Search. 5. To play sound through the projector speaker, simply click Activate audio out. One projector displaying screens of up to 4 computers The projection screen can be divided into four parts for simultaneous projection of the screen contents of all four connected computers. 1. Connect each computer to the projector. See "Connecting the projector with your computer" on page 3 for detail. 2. Make sure QPresenter is downloaded and installed. See "Downloading QPresenter" on page 7 and "Installing QPresenter" on page 7 for detail. 3. Open QPresenter by clicking the icon. 4. Type the projector IP address and click Connect. Or you can search for projectors, simply click Search to list all the projectors on the same local area network. Click the desired projector in the Search result list, and click Connect. You can also type a desired projector name and click Search. 5. Once connected, open the Special Feature page of QPrensenter and decide a display location by click 1, 2, 3, 4, L, R or Full Screen. 20 Projecting computer screen contents