BenQ RP552H User Manual - Page 29
Basic operations, Turning the display on or off, Turning off the display by Quickoff, Initial setup
View all BenQ RP552H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Basic operations 25 Basic operations Turning the display on or off 1. Be sure to following the instruction of Connecting power on page 24. 2. Before turning on the display, make sure the Power switch is set to ON (I). The system will enter standby mode. RP552/RP552H RP840G Power switch Power Switch IR Receiver Power Button • To turn on the display, press the Power button on the control panel or on the remote control. • To turn off the display, press the Power button on the control panel or on the remote control. The system will automatically enter standby mode. The display's standby mode still consumes power. To completely cut off power supply, set the Power switch to OFF (O) and then disconnect the power cord from the power outlet. Turning off the display by Quickoff Tap Quickoff on the screen to turn off the display without using the remote control. Initial setup After you have connected the display to the power, you are ready to power on the display. The first time you power on the display, you will be guided through a series of setup screens. Follow the on-screen instructions or the steps below to start up your display and complete the initial setup. 1. Turn on the display. Wait for the display to boot up with the BenQ screen. This may take a moment. 2. Tap Next on the screen to begin. Follow the on-screen instructions to set up the language, date and time, and network. Or your can skip some of these steps and complete the setup later.