BenQ SH910 SH910 User Manual - Page 39

Controlling the projector through a LAN environment, Configuring the Wired LAN Settings - wireless

Get BenQ SH910 PDF manuals and user guides View all BenQ SH910 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 39 highlights

Controlling the projector through a LAN environment Network Settings allow you to manage the projector from a computer using a web browser when the computer and the projector are properly connected to the same local area network. Configuring the Wired LAN Settings Internet IP Router If you are in a DHCP environment: 1. Take a RJ45 cable and connect one end to the LAN input jack of the projector and the other end to the RJ45 port. 2. Press MENU/EXIT and then press / until the SYSTEM SETUP: Advanced menu is highlighted. 3. Press to highlight Network Settings and press MODE/ENTER. The Network Settings page displays. 4. Press to highlight Wired LAN and press MODE/ENTER. 5. Press to highlight DHCP and press / to select On. 6. Press to highlight Apply and press MODE/ENTER. 7. Re-enter the Wired LAN page. The IP Address, Subnet Mask, Default Gateway, and DNS Server settings will be displayed. Note down the IP address. If the IP Address still does not display, contact your ITS administrator. If you are in a non-DHCP environment: 1. Repeat steps 1-4 above. 2. Press to highlight DHCP and press / to select Off. 3. Contact your ITS administrator for information on the IP Address, Subnet Mask, Default Gateway, and DNS Server settings. 4. Press to select the item you want to modify and enter the value. 5. Press to highlight Apply and press MODE/ENTER. Configuring the Wireless LAN Settings BenQ wireless dongle Operation 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
Operation
39
Controlling the projector through a LAN
environment
Network Settings
allow you to manage the projector from a computer using a web browser
when the computer and the projector are properly connected to the same local area network.
Configuring the Wired LAN Settings
If you are in a DHCP environment:
1.
Take a RJ45 cable and connect one end to the LAN input jack of the projector and the
other end to the RJ45 port.
2.
Press
MENU/EXIT
and then press
/
until the
SYSTEM SETUP: Advanced
menu
is highlighted.
3.
Press
to highlight
Network Settings
and press
MODE/ENTER
. The
Network
Settings
page displays.
4.
Press
to highlight
Wired LAN
and press
MODE/ENTER
.
5.
Press
to highlight
DHCP
and press
/
to select
On
.
6.
Press
to highlight
Apply
and press
MODE/ENTER
.
7.
Re-enter the
Wired LAN
page. The
IP Address
,
Subnet Mask
,
Default Gateway
, and
DNS Server
settings will be displayed. Note down the IP address.
If the IP Address still does not display, contact your ITS administrator.
If you are in a non-DHCP environment:
1.
Repeat steps 1-4 above.
2.
Press
to highlight
DHCP
and press
/
to select
Off
.
3.
Contact your ITS administrator for information on the
IP Address
,
Subnet Mask
,
Default Gateway
, and
DNS Server
settings.
4.
Press
to select the item you want to modify and enter the value.
5.
Press
to highlight
Apply
and press
MODE/ENTER
.
Configuring the Wireless LAN Settings
IP Router
Internet
BenQ wireless dongle