BenQ SH910 SH910 User Manual - Page 59
SYSTEM SETUP: Advanced, Network Settings, MODE/ENTER, Remote Desktop, ENTER, Account, Password
View all BenQ SH910 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
3. Open the OSD menu and go to the SYSTEM SETUP: Advanced > Network Settings menu. Press MODE/ENTER. 4. Highlight Remote Desktop and press MODE/ ENTER. 5. Enter the Account and Password the same as step 1. 6. Highlight Connect and press MODE/ENTER to connect the selected PC. 7. Connect USB keyboard or mouse to control the host PC's desktop through the projector. • Remote Desktop Control does not support PC Standby mode. • Remote Desktop Control only supports LAN source so the projector source is fixed on LAN. Operation 59
Operation
59
3.
Open the OSD menu and go to the
SYSTEM SETUP: Advanced
>
Network Settings
menu. Press
MODE/ENTER
.
4.
Highlight
Remote Desktop
and press
MODE/
ENTER
.
5.
Enter the
Account
and
Password
the same as step
1.
6.
Highlight
Connect
and press
MODE/ENTER
to
connect the selected PC.
7.
Connect USB keyboard or mouse to control the
host PC’s desktop through the projector.
•
Remote Desktop Control does not support PC Standby mode.
•
Remote Desktop Control only supports LAN source so the projector source is fixed on
LAN.