BenQ W1070 W1070 User Manual - Page 27
Utilizing the password function, Setting a password, If you forget the password - projector manual
View all BenQ W1070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Utilizing the password function For security purposes and to help prevent unauthorized use, the projector includes an option for setting up password security. The password can be set through the On-Screen Display (OSD) menu. Once the password is set and this function is selected, the projector is password-protected. Users who do not know the correct password can not use the projector. You will be inconvenienced if you activate the password functionality and subsequently forget the password. Print out this manual (if necessary) and write the password you used in this manual, and keep the manual in a safe place for later recall. Setting a password Once a password has been set and activated, the projector cannot be used unless the correct password is entered every time the projector is started. 1. Press MENU/EXIT on the projector or remote control and then press / until the System Setup : Advanced menu is Input New Password highlighted. 2. Press to highlight Password and press MODE/ENTER. The Password page displays. 3. Highlight Change Password and press MODE/ENTER. The Input Password page displays. Back 4. As the picture indicates, the four arrow keys ( , , , ) respectively represent 4 digits (1, 2, 3, 4). According to the password you desire to set, press the arrow keys on the remote control or projector to enter six digits for the password. Confirm the new password by re-entering the new password. Once the password is set, the OSD menu returns to the Password page. IMPORTANT: The digits being input will display as asterisks on-screen. Write your selected password down here in this manual in advance or right after the password is entered so that it is available to you should you ever forget it. Password 5. Highlight Power On Lock and then press / to select On. 6. Confirm the current password. 7. To leave the OSD menu, press MENU/EXIT. If you forget the password If the password function is activated, you will be asked to enter the sixdigit password every time you turn on the projector. If you enter the wrong password, the password error message as pictured to the right displays lasting for three seconds, and the Input Password page follows. You can retry by entering another six-digit password, or if you did not record the password in this manual, and you absolutely do not remember it, you can use the password recall procedure. See "Entering the password recall procedure" on page 28 for details. Password Error Please try again. If you enter an incorrect password 5 times in succession, the projector will automatically shut down in a short time. Using the projector 27