Beretta A400 Xplor Light Beretta A400 Xplor User Manual - Page 13
Beretta's Innovative Microcore Recoil Pad, Cut-off, Drop And Cast Spacers, Magazine Capacity, - accessories
View all Beretta A400 Xplor Light manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
EN BERETTA'S INNOVATIVE MICROCORE RECOIL PAD The most exciting new feature of the A400 Xplor is the special Beretta Microcore recoil pad, providing unparalleled recoil energy absorption capacity. Thanks to the open-cell technopolymer foam, in response to pressure during firing, the recoil pad immediately begins to gently relax without expanding or warping. The material was specially formulated by Beretta after years of careful testing and observation on shooting fields around the world. The stock is designed to accept interchangeable recoil pads without the need for adjustment. By using different sized pads, the length of pull can be varied. CUT-OFF The cut-off is positioned on the left side of the receiver: it can be activated using one hand with the breech bolt locked. If the cut-off is accidentally engaged it will disengage automatically in the feeding phase after firing. DROP AND CAST SPACERS Between the stock and the receiver is a technopolymer spacer and inside the stock is a stainless steel plate that can be used to change the drop and cast of the stock by simply modifying the assembly configuration. A set of additional spacers is also provided to further change the drop by replacing the spacer pair. MAGAZINE CAPACITY The magazine has a two-round capacity*, in line with current hunting regulations in many countries, made possible by the insertion of a reducer. This reducer restricts firearm use to no more than three rounds (two in the magazine, and one in the cartridge chamber). This device is fitted by Beretta during manufacture and assembly of the A400 Xplor. In certain specific areas, hunting is only authorised with firearms of not more than two rounds. To use the A400 Xplor in these regions, the magazine capacity must be limited to a single shot with the provided reducer plug (operation to be performed by a competent gunsmith). * see "Ammunition". ACCESSORIES The Beretta A400 Xplor shotgun comes in a case that contains the firearm and a complete range of accessories for personalising and cleaning the firearm. WARNING: There are many special Beretta parts and accessories to personalise your firearm. To request this extensive line of parts and accessories, please contact your local Beretta dealer. 14