Bernina 350PE User Guide - Page 17
Changing the Presser-Foot Sole, Changing the Presser Foot
View all Bernina 350PE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Preparation - Sewing 17 Changing the Presser-Foot Sole █ raise the needle and the presser foot shaft █ power switch to «0» (off) █ press the button on the shaft to release the sole Attaching the presser-foot sole █ place the presser-foot sole under the shaft so that the peg sits under the opening of the shaft 3 █ lower the presser-foot lifter and the foot sole will click into position Changing the Presser Foot Changing the Presser Foot █ raise the needle and presser foot █ power switch to «0» (off) Raising the Lever █ raise the clamping lever █ remove the presser foot Attaching the Presser Foot █ guide the foot upwards over the cone █ press the clamping lever down 033301.70.04_1007_B330_B350_B380_EN
17
Preparation - Sewing
Changing the Presser-Foot Sole
raise the needle and the presser foot shaft
█
power switch to «0» (off)
█
press the button on the shaft to release the sole
█
Attaching the presser-foot sole
place the presser-foot sole under the shaft so that the peg sits under the
█
opening of the shaft
lower the presser-foot lifter and the foot sole will click into position
█
Changing the Presser Foot
Changing the Presser Foot
raise the needle and presser foot
█
power switch to «0» (off)
█
Raising the Lever
raise the clamping lever
█
remove the presser foot
█
Attaching the Presser Foot
guide the foot upwards over the cone
█
press the clamping lever down
█
3
033301.70.04_1007_B330_B350_B380_EN