Binatone Action 950 User Manual - Page 10

11. Troubleshooting Guide Symptom No power. Reception is weak. Cannot change CTCSS subchannels. Solution Check if the batteries are installed properly. The battery may be weak. Replace the old batteries with new ones. Turn the PWR/VOL button to increase the receiver volume level. The receiving signal may be weak and/or out of range. If this happens, press the MENU and DOWN buttons at the same time to activate the Monitor function. Key lock mode must be deactivated if the Key lock icon ( ) is displayed on the LCD Screen. To change CTCSS sub-channels, press the MENU button twice, the CTCSS sub-channel number flashes on the LCD Screen. Press the UP or DOWN button to change the CTCSS sub-channel. Batteries may be weak. Range is limited. Sound distortion problems. Batteries may be weak. Replace with new batteries if the charge level indicator gets low. See the "Effective Range" diagram. The maximum range will vary depending on terrain and environment. Open fields provide the maximum range, while steel/concrete structures, heavy foliage, and use in buildings and in vehicles may limit the range significantly. Wearing the radio close to the body, such as in a pocket or on a belt, will decrease range; change the location of the radio. If you are transmitting, speak in a normal tone of voice, 5 cm away from the MIC (microphone.). If you are receiving, lower the volume to a comfortable level. Radios too close. Radios must be at least 2 metres apart; increase your distance. Radios too far apart. Obstacles interfere with transmission. Talk range is up to 10kms in clear unobstructed conditions. No communication Check the Channel and the CTCSS code setting. Both the Transmitting and Receiving PM R units should be tuned to the same Channel and CTCSS code (if applicable). BINATONE TELECOM PLC 1 Apsley Way London NW2 7HF,United Kingdom. Tel: +44(0) 20 8955 2700 Fax: +44(0) 20 8344 8877 e_-_m_a_il_: _b_in_a_to_n_e_u_k_@_b_in_a_t_o_ne_t_e_le_c_o_m_.c_o_.u_k__________ . EC Declaration of Conformity We the manufacturer / Importer : Binatone Telecom Plc 1 Apsley Way London NW2 7HF, United Kingdom. Declare under our sole responsibility that the following product Type of equipment: Model Name: Country of Origin: Brand: Private Mobile Radio Action 950 Series China Binatone complies with the essential protection requirements of R&TTE Directive 1999/5/EC on the approximation of the laws of the Council Directive 2004/108/EC on the approximation of the laws of the Member States relating to electromagnetic compatibility (EMC) and the European Community Directive 2006/95/EC relating to Electrical Safety. Assessment of compliance of the product with the requirements relating to the essential requirements according to Article 3 R&TTE was based on Annex III of the Directive 1999/5/EC and the following standard: EMC: EN 301 489 -5 V1.3.1:(2002-08) Waste electrical products must not be disposed of with household waste. EN 301 489 -1 V1.6.1:(2005-09) EN 300 296 -2 V1.1.1:(2001-03) Electrical Safety: EN 60065-1:2006 This equipment should be taken to your local recycling centre for safe treatment. The product is labelled with the European Approval Marking CE as show. Any Unauthorized modification of the product voids this Declaration. Manufacturer / Importer (signature of authorized person) Signature: London, Place & Date: 8th Nov, 2008 UK(BTP) Ver 3 Aug 09