Binatone Lifestyle 1900 User Manual - Page 1

THIS EQUIPMENT IS NOT DESIGNED FOR MAKING

EMERGENCY TELEPHONE CALLS WHEN THE POWER

FAILS. ALTERNATIVE ARRANGEMENTS SHOULD BE

MADE FOR ACCESS TO DIAL EMERGENCY SERVICES.

Before operating this set,

please read these instructions carefully.

1

2

3

1

IMPORTANT SAFETY INSTRUCTIONS

When using your telephone equipment, basic safety precautions should always

be followed to reduce the risk of fire, electric shock and injury, including the

1)

Read and understand all the instructions.

2)

Follow all warnings and instructions marked on the product.

3)

Unplug this product from the wall outlet before cleaning. Do not use liquid

cleaners or aerosol cleaners. Use a damp cloth for cleaning.

4)

sink, swimming pool).

5)

Do not overload wall outlets and extension cords as this can result in the risk

of fire or electric shock.

6)

Unplug this product from the wall outlet and refer servicing to our Repair

•

When the power supply cord or plug is damaged or frayed.

• If the product does not operate normally by following the operating instructions.

•

If the product has been dropped and the cabinet has been damaged.

•

If the product exhibits a distinct change in performance.

7) NEVER use your

Lifestyle 190

8)

Do not use the telephone to report a gas leak in the vicinity of the leak.

9)

Use only the supplied NiMH (Nickel Metal Hydride) batteries! The operation

periods for the handsets are only applicable with the default battery capacities

10) The use of other battery types or non-rechargeable batteries/primary cells

can be dangerous. These may cause interference and/or damage to the unit

or surroundings. The manufacturer will not be held liable for damage arising

from such non-compliance.

11) Do not use third party charging bays. Damage may be caused to the batteries.

12) Please ensure the

battery plug is inserted correctly into the socket.

13) Dispose of batteries safely. Do not immerse them in water, burn them, or put

Package contents

The package contains the following items:

• 1 Handset

• 1 Base station

• 1 Mains power adapter

• 1 Telephone line cord

•

1 echargeable battery pack

• 1 User manual

them

where they could get

punctured.

Centre under the

following conditions:

4

following:

USER GUIDE

3

GETTING TO KNOW YOUR PHONE

3.1

Handset Overview

6

Indicates when the battery needs charging.

Flashes when low battery power level is detected.

7

(BACK)

(INT)

Indicates when there are more characters or numbers in front of those

Indicates when there are more characters or numbers after those being

Press the MENU/OK key to access the main menu.

Press the MENU/OK key to confirm the current selection.

Indicates new TAM message / new call in TAM message list / call list.

Press the C/MUTE key to start an intercom call.

Press the C/MUTE key to go back to the previous menu level or cancel

Press the C/MUTE key to clear a character, stop the alarm, or mute/unmute

being

displayed.

displayed.

the current action.

the microphone during a call.

3.4

Menu Structure

In idle mode, press <MENU/OK>

Refer to the following for the menu structure.

8

9

3.5

Text and Digit Entry Table

The following table shows you where each letter and punctuation character can

be found, by using repeated presses of the alphanumeric keypad. This will be

helpful when storing a name in the phonebook and renaming your handset.

In editing mode, a cursor is displayed to indicate the current text entry position.

It is positioned at the right of the last character entered.

Writing Tips:

1.

Once a character is selected, the cursor will move to the next position after a

short pause.

2.

You can move the cursor within the text with the <UP/DOWN> keys to

amend the text entry.

3.

Press <C> to delete the last character.

4.

Press and hold <C> to delete the entire text string.

10

4.3

End a Call

During a call press <TALK OFF> to end the call.

OR

Put the handset on the base station or charger to end the call.

12

11

13

4.4

Adjust Volume

There are 5 levels (VOLUME 1 to VOLUME 5) to choose from for the earpiece

During a call:

setting is shown.

When you end the call, the setting will remain at the last selected level.

4.5

Mute a Call

You can talk to someone nearby without letting the caller hear you during a call.

During a call:

Press <C> to mute the microphone and “

MUTED

” will display on the LCD.

Your caller cannot hear you.

Press <C> again to unmute the microphone.

4.6

the

In idle, press and hold <HASH/#> to turn off the handset ringer. The “RINGER

OFF”

or speakerphone

volume.

icon is displayed on the LCD.

4.7

Turn on the Keypad Lock

In idle, press and hold <STAR/*> to turn on the

keypad lock. The

4.8

Redial the last number

You can redial any of the 5 last numbers called.

If you have stored a name in

the phonebook to go with the number, the name will be displayed instead.

4.8.1

Redial a Number from the Redial List

1.

In idle mode, press <DOWN> to access the redial list.

Note:

If the redial list entry shows a name, press <Hash/#> to view the number

2.

Press <UP/DOWN> to browse the redial list.

3. Press

<TALK ON> or <SPEAKERPHONE>

to dial to the selected redial number.

Note:

If there are no numbers in the redial list, the display shows

“

EMPTY

”

.

4.8.2

Store a Redial Number into the Phonebook

1.

In idle mode, press <DOWN> to access the redial list.

2. Press <MENU> and <UP/DOWN> to select

ADD TO PB.

3.

Press <OK> and then enter the name you want to use in the phonebook.

4.

Press <OK> and then modify the number, if necessary.

5. Press <OK> to show <MELODY 1>.

6.

Press <UP/DOWN> to browse the ringtone list. The respective ringtone will

be played when browsing the ringtone list. (Note: the selected melody will

7.

Press <OK> to confirm, and the entry will be stored.

Note:

The display will still flash the Call icon and show CALL or the Caller Display

number, when there is an incoming call, even if the ringer is turned off

To turn the ringer back on, press and hold <HASH/#> again.

Note:

You can still use


to answer a call

To turn the keypad lock off, press and hold <STAR/*> again.

only be played if you subscribe to Caller Display and the incoming number

icon is displayed on the LCD.

The most recent last number will display at the top of the redial list.

of this entry.

matches the

stored number.)

4.8.3

Delete a Redial Number

1.

Follow Steps 1 and 2 in section 4.8.1.

2.

Press <MENU> and <UP/DOWN> to select

DELETE.

3.

Press <OK> to confirm, and the entry will be deleted.

4.9

Find the Handset

You can locate the handset by pressing <PAGE> on the base station.

All the

handsets registered to the base will produce the paging tone and show

4.8.4

Delete all Redial List entries

1.

Follow Steps 1 and 2 in section 4.8.1.

2.

Press <MENU> and <UP/DOWN> to select

DELETE ALL

3.

Press <OK> to display <CONFIRM?>.

4.

Press <OK> to confirm. All entries will be deleted and the display will show

<EMPTY>.

<TALK OFF> /<C> on any handset or <PAGE> on the base again.

Note:

If there is an incoming call during paging, the phone will ring with the

4.10 Make an Internal Call (For

multi-handset versions only

)

This feature is only applicable when there are at least two registered handsets.

It allows you to make internal calls, transfer external calls from one handset to

incoming call instead of paging.

LOCK”

"PAGING" on the display.

You can stop the paging by pressing <TALKON>/

another handset and make conference calls.

If the called handset is not

answered within 60 seconds, the called handset will stop ringing and the calling

Note:

If only one handset is registered to the base station, when <C/MUTE/INT>

is pressed, it will display

“NOT POSSIBLE”

4.10.1

Intercom Another Handset

1.

In idle mode, press <C/MUTE/INT> and all the other registered handset

2.

Enter the number of the handset that you want to call, or enter "9" to call all

3. The called handset rings and


must be

Note:

If only two handsets are registered to the base station, pressing

<C/MUTE/INT> will call the other handset immediately.

numbers will display, along with a "9".

to establish the intercom call.

4.10.3

Transfer an External Call to another handset

During an external call:

1. Press <MENU> and <UP/DOWN> to select

INTERCOM.

2.

Press <OK> to show all the other registered handset numbers, plus "9".

3.

The external call is put on hold automatically and the called handset rings.

4. Press


on the called handset to establish

Enter the

number for the handset you

want to transfer the call to.

handset will return to

standby mode.

handsets.

5.

Press <TALK OFF> on the calling handset or put the calling handset on the

charging cradle to end the current call with the external party.

6.

The external call is transferred to the called handset.

4.10.2

Call All Handsets

1.

In idle mode, press <C/MUTE/INT> and the registered handsets will display.

2. Press

digit key <9>

to ring to all registered handsets

4.10.4

Make a 3-way Conference Call

The conference call feature allows one external call to be shared with two

handsets (in intercom).

The three parties can share the conversation and no additional network

subscription is required.

14

During an external call:

1.

Follow Steps 1 to 4 in section 4.10.3.

2.

Press and hold <STAR> on the calling handset to establish the conference call

Either handset can exit the conference by pressing <TALK OFF>, leaving the

other handset still connected to the

external call.

5

PRIVATE PHONEBOOK

15

16

pressed on that handset

an internal call.

handset is ringing.

when the

5

near water (for example, near

a bath tub, kitchen

Keep your

Lifestyle 190

se this product

and don't let it get wet or u

base from the telephone line and the mains socket when there are storms

in your area. Damage caused by lightning is not covered by the guarantee.

to go to CALL LIST, the first option in the menu list.

Press <UP> or <DOWN> to go to other options in the menu list.

Press <OK> to enter a sub-menu or function.

Press <Back> to go back to the previous level.

ress <UP/DOWN> to select volume 1-5. The current

Turn off

Handset Ringer

Note: If there is an external call while you are on an intercom call, you'll

hear warning beeps, and you have to end the intercom

all, before you can

c

answer the external call.

Note: If the other handset has not answered the intercom call, you can stop

the intercom and return to the external call by pressing <TALK OFF>

P

Note: If you have a Twin, Triple or Quad system, you will also have the requisite

extra handset(s) and batter

, and a charger pod for each extra handset.

ies

**Please note that all calls are charged at local rate

www.binatoneonline.com

0 away from hot, humid conditions or strong sunlight,

0 outdoors during a thunderstorm-unplug the

Binatone Helpline (for UK only)

Monday to Friday from 9:00am to 5:00pm

Tel: 0845 345 9677

Lifestyle 1900 system

Digital Cordless Telephone

TECHNICAL DETAILS

Standard

Frequency range

Channel bandwidth

Operating range

Operating time

Temperature range

Digital Enhanced Cordless

Telecommunication(DECT)

1.88 to 1.9 GHz

1.728 MHz

Up to 300m outdoors; up to 50mindoors

Standby: 100 hours, Talking:

10 hours

Battery charge time:15 hours

Operating 0 C to 40 C

(bandwidth = 20 MHz)

Port specification

The

port (connected to the mains power supply) is a

SELV port with respect to EN41003.

CLEANING AND CARE

Do not clean

any part of your Lifestyle 1900 system with benzene, thinners or other

solvent chemicals - this

may cause

permanent damage which is not covered by the

Guarantee.

When necessary, clean it with a damp cloth.

Keep your Lifestyle 1900 system away from

hot, humid conditions

or

strong

and

don't let it

get wet.

Every effort has been made to ensure high standards of reliability for your

do not try to

Electrical power

TenPao - S002CV0600030 / S002CB0600030

Charger unit:

HONR – ADS-3V-06 06018 GPB / ADS-3V-06 06018 GPG

TenPao - S002CV0600030 / S002CB0600030

Battery Information

GPI – VTHC043C02, Type NiMH (Rechargeable battery)

Voltage Rating

400mAh 2.4V AAA Size Pack

BYD- H-AAA400BX2, Type NiMH (Rechargeable battery)

Voltage Rating


Voltage Rating


Base unit:

HONR – ADS-3V-06 06018 GPB / ADS-3V-06 06018 GPG

input 100-240VAC 50/60Hz 100mA, output 6VDC 300mA


, Storage -20 C to 60 C



Caution

Risk of explosion if battery is replaced by an incorrect type

Dispose of used batteries according to the instructions.

The

port (connected

to the telephone line) is aTNV port with

respect to

EN41003.

Lifestyle 1900 system. However, if something does go wrong,

please

repair it yourself

sunlight,

or visit our website:

, consult your supplier or the Helpline.

CORUN- Ni-MHAAA400*2, Type NiMH (Rechargeable battery)

R

To use your handset and base together, you must be able to establish a radio link

between them. The signal between the handset and the base is in accordance

with the normal standards for a DECT phone: Maximum range up to 300 metres

outdoors or 50 metres indoors.

The signal range may decrease if there is any large metal object between the

handset and the base, such as a refrigerator, a mirror, a filing cabinet, metallic

doors or reinforced concrete. The signal strength may also be reduced by other

solid structures like walls, or by other radio or electrical interference.

Main

Menu

CALL LIST

PHONEBOOK

BS

SETTINGS

HS

SETTINGS

REGISTRATION

DEFAULT

Sub

menu

ADD TO PB

DELETE

DELETE ALL

phonebook EntryF

Binatone Lifestyle 1900 User Manual - Page 1

Binatone Lifestyle 1900 Manual

Page 1 highlights