Biostar 865G MICRO 775 865G Micro 775 bios setup description - Page 21
Primary / Secondary /Master / Slave UDMA, The Choices: Auto, On-Chip Serial SATA, Serial ATA Port 0/ - driver
View all Biostar 865G MICRO 775 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
865G Micro 775 Primary / Secondary /Master / Slave UDMA Ultra DMA/100 functionality can be implemented if it is supported by the IDE hard drives in your system. As well, your operating environment requires a DMA driver (Windows 95 OSR2 or a third party IDE bus master driver). If your hard drive and your system software both support Ultra DMA/100, select Auto to enable BIOS support. The Choices: Auto (default), Disabled. On-Chip Serial SATA This item allows you to choose: Disabled: disabled SATA Controller. Auto: auto arrange by BIOS. Combined Mode: PATA and SATA are combined max of 2 IDE drivers in each channel. Enhanced Mode: enabled both SATA and PATA max of 6 IDE drivers are supported. SATA Only: SATA is operating in legacy mode. The Choices: Auto (default), Combined Mode, Enhanced Mode, SATA only. Serial ATA Port 0/Port1 Mode The Choices: Primary Master (default). 20