Biostar 865G MICRO 775 865G Micro 775 bios setup description - Page 23

Super IO Device

Get Biostar 865G MICRO 775 PDF manuals and user guides View all Biostar 865G MICRO 775 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

865G Micro 775 AC97 Audio This item allows you to decide to enable/ disable to AC97 Audio support. The Choices: Auto (default), Disabled. AC97 Modem This item allows you to decide to enable/ disable to AC97 Modem support. The Choices: Auto (default), Disabled. Onboard PCI LAN This item allows you to enable or disable the Onboard PCI LAN. The Choices: Enabled (default), Disabled. Onboard LAN Boot ROM Decide whether to invoke the boot ROM of the onboard LAN chip. The Choices: Enabled (default), Disabled. Super IO Device Press Enter to configure the Super I/O Device. Onboard FDC Controller Select Enabled if your system has a floppy disk controller (FDC) installed on the system board and you wish to use it. If install and FDC or the system has no floppy drive, select Disabled in this field. The Choices: Enabled (default), Disabled. Onboard Serial Port 1 Select an address and corresponding interrupt for the first and second serial ports. The Choices: 3F8/IRQ4 (default), Disabled, Auto, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3. 22

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
865G Micro 775
22
AC97 Audio
This item allows you to decide to enable/ disable to AC97 Audio support.
The Choices: Auto
(default), Disabled.
AC97 Modem
This item allows you to decide to enable/ disable to AC97 Modem support.
The Choices: Auto
(default), Disabled.
Onboard PCI LAN
This item allows you to enable or disable the Onboard PCI LAN.
The Choices: Enabled
(default), Disabled.
Onboard LAN Boot ROM
Decide whether to invoke the boot ROM of
the onboard LAN chip.
The Choices: Enabled
(default), Disabled.
Super IO Device
Press Enter to configure the Super I/O Device.
Onboard FDC Controller
Select Enabled if your system has a floppy disk controller (FDC) installed on the
system board and you wish to use it. If install and FDC or the system has no
floppy drive, select Disabled in this field.
The Choices: Enabled
(default), Disabled.
Onboard Serial Port 1
Select an address and corresponding interrupt for the first and second serial ports.
The Choices: 3F8/IRQ4
(default), Disabled, Auto, 2F8/IRQ3,
3E8/IRQ4, 2E8/IRQ3.