Biostar IDEQ 200P iDEQ 200P user's manual. - Page 19
Power Source Selection for USB: JUSBV1/ JUSBV2/ JUSBV3, Front USB Headers: JUSB1/JUSB2
View all Biostar IDEQ 200P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
BIOSTAR Motherboard * Clear CMOS Procedures: 1. Remove AC power line. 2. Set the jumper to "Pin 2-3 Close". 3. Wait for five seconds. 4. Set the jumper to "Pin 1-2 Close". 5. Power on the AC. 6. Reset your desired password or clear the CMOS data. (7) Front USB Headers: JUSB1/JUSB2 The motherboard provides two USB 2.0 Pin Headers. USB 2.0 technology increases Data transfer rate up to a maximum throughput of 480 Mbps, which is 40 times faster than USB 1.1, and is ideal for connecting high-speed USB interface peripherals such as USB HDD, digital cameras, MP3 players, printers, modems, etc. Pin Assignment 1 +5V(fused) 3 USBP45 USBP4+ 7 Ground 9 KEY Pin Assignment 2 +5V(fused) 4 USBP56 USBP5+ 8 Ground 10 NC (8) Power Source Selection for USB: JUSBV1/ JUSBV2/ JUSBV3 JUSBV1/JUSBV2 JUSBV3 Pin 1-2 close 1 3 Pin 2-3 close Assignment +5V +5V Standby Voltage Description JUSBV1: for JUSB3/4 ports JUSBV2: for JRJ45 port. JUSBV3: for JUSB1/2 headers. 5V standby to power on. 1 3 Note: In order to power-on USB devices function, "JUSBV1/JUSBV2/ JUSBV3" jumper caps should be placed on pin 2-3 respectively. 19 English