Biostar M6TSU M6TSU user's manual - Page 52
Use IR Pins, Onboard Parallel Port, Parallel Port Mode, EPP Mode Select, ECP Mode Use DMA
View all Biostar M6TSU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Chapter 2 BIOS Setup The Choices: Half (default), Full. Use IR Pins Consult your IR peripheral documentation to select the correct setting of the TxD and RxD signals. The Choices: IR-Rx2Tx2 (default), RxD2 TxD2. Onboard Parallel Port This item allows you to determine access onboard parallel port controller with which I/O Address. The Choices: 378/IRQ7 (default), 278/IRQ5, 3BC/IRQ7, Disabled. Parallel Port Mode The default value is SPP. SPP (default) Using Parallel Port as Standard Printer Port. EPP Using Parallel Port as Enhanced Parallel Port. ECP Using Parallel Port as Extended Capabilities Port. ECP+EPP Using Parallel Port as ECP & EPP mode. Normal Supports EPP or ECP mode. EPP Mode Select Select EPP port type 1.7 or 1.9. The Choices: EPP1.7 (default), EPP1.9. ECP Mode Use DMA Select a DMA Channel for the port. The Choices: 3 (default), 1. 2-17