Biostar M7VIG D M7VIG-D BIOS setup guide - Page 31

Frequency Control

Get Biostar M7VIG D PDF manuals and user guides View all Biostar M7VIG D manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

M7VIG-D BIOS Setup 9 Frequency Control Figure 9. Frequency Control Auto Detect PCI/ DIMM Clk This item allows you to enable / disable auto Detect PCI Clock. The Choices: Enabled (default), Disabled. Spread Spectrum This item allows you to enable / disable spectrum for all clock. The Choices: +/-0.25% (default), Disabled, -0.5%, +/-0.5%, +/-0.75%. CPU Host/ PCI Clock This item allows you to select CPU Clock, and CPU over clocking. If unfortunately, the system's frequency that you are selected is not functioning, there are two methods of booting-up the system. Method 1: Clear the COMS data by setting the JCOMS1 ((2-3) closed)) as "ON" status. All the CMOS data will be loaded as defaults setting. Method 2: Press the key and Power button simultaneously, after that keep-on pressing the key until the power-on screen showed. This action will boot-up the system according to FSB of the processor. 30

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
M7VIG-D BIOS Setup
30
9 Frequency Control
±
Figure 9. Frequency Control
Auto Detect PCI/ DIMM Clk
This item allows you to enable / disable auto Detect PCI Clock.
The Choices: Enabled
(default), Disabled.
Spread Spectrum
This item allows you to enable / disable spectrum for all clock.
The Choices: +/-0.25%
(default), Disabled, -0.5%, +/-0.5%, +/-0.75%.
CPU Host/ PCI Clock
This item allows you to select CPU Clock, and CPU over clocking.
If unfortunately, the system’s frequency that you are selected is
not functioning, there are two methods of booting-up the system.
Method 1: Clear the COMS data by setting the JCOMS1 ((2-3) closed))
as “ON” status. All the CMOS data will be loaded as
defaults setting.
Method 2: Press the <Insert> key and Power button simultaneously,
after that keep-on pressing the <Insert> key until the
power-on screen showed. This action will boot-up the
system according to FSB of the processor.