Biostar M7VIK M7VIK compatibility test report - Page 10
Pnp / Pci Configuration, Integrated Peripherals
View all Biostar M7VIK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
IRQ 3 (COM 2) Enabled Pass IRQ 4 (COM1 ) Enabled Pass IRQ5 (LPT 2 ) Enabled Pass IRQ6 (Floppy Disk) Enabled Pass IRQ7 (LPT1) Enabled Pass IRQ8 (RTC Alarm) Disabled Pass IRQ9 (IRQ2 Redir) Disabled Pass IRQ10 (Reserved) Disabled Pass IRQ11 (Reserved) Disabled Pass IRQ12 (PS/2 Mouse) Enabled Pass IRQ13 (Coprocessor) Enabled Pass IRQ14 (Hard Disk) Enabled Pass IRQ15 (Reserved) Disabled Pass PnP / PCI CONFIGURATION PnP OS Installed NO Pass Reset Configuration Data Disabled Pass Resources Controlled By Auto(ESCD ) Pass X IRQ Resources Press Enter Pass PCI/VGA Palette Disable Pass Assign IRQ for VGA Enabled Pass Assign IRQ for USB Enabled Pass INTEGRATED PERIPHERALS VIA Onchip IDE Device Press Enter Pass OnChip IDE Channel 0 Enabled Pass OnChip IDE Channel 1 Enabled Pass IDE Prefetch Mode Enabled Pass Primary Master PIO Auto Pass Primary Slave PIO Auto Pass Secondary Master PIO Auto Pass Secondary Slave PIO Auto Pass Primary Master UDMA Auto Pass Primary Slave UDMA Auto Pass Secondary Master UDMA Auto Pass Secondary Slave UDMA Auto Pass OnChip PCI Device Press Enter Pass VIA -3058 AC97 Audio Auto Pass VIA-3068 MC97 Modem Auto Pass 1394 Fire Wire Enabled Pass Serial ATA Onboard Chip Enabled Pass CMI Onboard Audio Enabled Pass Super IO Device Press Enter Pass Onboard FDC Controller Enable Pass Onboard Serial Port 1 3F8/IRQ4 Pass 10