Biostar M7VIK M7VIK compatibility test report - Page 51

Vcore Transient TestDos Mode

Get Biostar M7VIK PDF manuals and user guides View all Biostar M7VIK manuals
Add to My Manuals
Save this manual to your list of manuals

Page 51 highlights

CPU CH 1 Condition Vcore Transient Test(Dos Mode) Athlon_xp_2700+ M\B VIK/1.0 STPCLK pin waveform CH 2 Vcore waveform 1.Boot the system to the Win98SE environment(Command Prompt Only) Dos mode and run the stpclk.bat 2.At the main menu ,type "U" to go to the "Utilities Submenu" 3.At the next menu , type "B" to "Enable Stop Clock Throttling" 4.At this menu , type "7" to enable Stop Clock Throttling at the rang of 50.0%~65.0% 5.Press tiwce and then "Y" to exit the stpclk.bat program 6.Measure the Vcore waveform Vcore Transient waveform RESULT PASS 51

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
51
Vcore Transient Test(Dos Mode)
CPU
Athlon_xp_2700+
M\B
VIK/1.0
CH 1
STPCLK pin waveform
CH 2
Vcore waveform
Condition
1.Boot the system to the Win98SE environment(Command Prompt Only)
Dos mode and run the stpclk.bat
2.At the main menu ,type “U” to go to the “Utilities Submenu”
3.At the next menu , type “B” to “Enable Stop Clock Throttling”
4.At this menu , type “7” to enable Stop Clock Throttling at the rang of
50.0%~65.0%
5.Press <ESC> tiwce and then “Y” to exit the stpclk.bat program
6.Measure the Vcore waveform
Vcore Transient waveform
RESULT
PASS