Biostar M7VIP PRO M7VIP Pro compatibility test report - Page 52
Vcore Transient TestDos Mode
View all Biostar M7VIP PRO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
CPU CH 1 Condition Vcore Transient Test(Dos Mode) Athlon_xp_2700+ M\B M7VIP Pro1.0 STPCLK pin waveform CH 2 Vcore waveform 1.Boot the system to the Win98SE environment(Command Prompt Only) Dos mode and run the stpclk.bat 2.At the main menu ,type "U" to go to the "Utilities Submenu" 3.At the next menu , type "B" to "Enable Stop Clock Throttling" 4.At this menu , type "7" to enable Stop Clock Throttling at the rang of 50.0%~65.0% 5.Press tiwce and then "Y" to exit the stpclk.bat program 6.Measure the Vcore waveform Vcore Transient waveform RESULT PASS 52
52
Vcore Transient Test(Dos Mode)
CPU
Athlon_xp_2700+
M\B
M7VIP Pro1.0
CH 1
STPCLK pin waveform
CH 2
Vcore waveform
Condition
1.Boot the system to the Win98SE environment(Command Prompt Only)
Dos mode and run the stpclk.bat
2.At the main menu ,type “U” to go to the “Utilities Submenu”
3.At the next menu , type “B” to “Enable Stop Clock Throttling”
4.At this menu , type “7” to enable Stop Clock Throttling at the rang of
50.0%~65.0%
5.Press <ESC> tiwce and then “Y” to exit the stpclk.bat program
6.Measure the Vcore waveform
Vcore Transient waveform
RESULT
PASS