Biostar M7VIP PRO M7VIP Pro compatibility test report - Page 9
REQUIRED BIOS DEFAULT SETTINGS, Lists, Specification, Result
View all Biostar M7VIP PRO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
REQUIRED BIOS DEFAULT SETTINGS Lists Specification Result BIOS FEATURES SETUP Boot Seq/Floppy Setup Press Enter Pass First Boot Device Floppy Pass Second Boot Device HDD-0 Pass Third Boot Device LS120 Pass Boot Other Device Enabled Pass Swap Floppy Drive Disabled Pass Boot Up Floppy Seek Enabled Pass Cache & Shadow Setup Press Enter Pass CPU Internal Cache Enabled Pass External Cache Enabled Pass CPU L2 Cache ECC Checking Enabled Pass Video BIOS Shadow Enabled Pass Virus Warning Disabled Pass Quick Power On Self Test Enabled Pass Boot Up Numlock Status ON Pass Gate A20 Option Fast Pass Typematic Rate Setting Disabled Pass X Typematic Rate(Chars/Sec) 6 Pass X Typematic Delay(MSEC) 250 Pass Security Option Setup Pass APIC Mode Enabled Pass MPS Version Control For OS 1.4 Pass OS Select For DRAM >64 M Non-OS2 Pass Summary Screen Show Disabled Pass CHIPSET FEATURES SETUP DRAM Clock/Drive Control Press Enter Pass Current FSB Frequency 166 MHZ Pass Current DRAM Frequency 166 MHZ Pass Current DDR Frequency 333 MHz Pass DRAM Timing By SPD Pass DRAM CAS Latency 2.5 Pass X Bank Interleave Disabled Pass Precharge to Active(Trp) 3T Pass Tras Non -DDR400/DDR400 7T / 10T Pass Active to CMD(Trcd) 3T Pass DRAM Burst Length 4 Pass DRAM Queue Depth 4 level Pass DRAM Command Rate 2T Command Pass Write Recovery Time 3T Pass 9