Biostar M7VIP M7VIP compatibility test report - Page 8
REQUIRED BIOS DEFAULT SETTINGS, Lists, Specification, Result
View all Biostar M7VIP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
REQUIRED BIOS DEFAULT SETTINGS Lists Specification Result BIOS FEATURES SETUP Virus Warning Disabled Pass Boot Seq/ Floppy Setup Press Enter Pass First Boot Device Floppy Pass Second Boot Device HDD-0 Pass Third Boot Device LS120 Pass Boot Other Device Enabled Pass Swap Floppy Drive Disabled Pass Boot Up Floppy Seek Enabled Pass CPU Internal cache Enabled Pass External Cache Enabled Pass CPU L2 Cache ECC Checking Enable Pass Quick Power On Self Test Enabled Pass Boot Up NumLock Status On Pass Gate A20 Option Fast Pass Typematic Rate Setting Disabled Pass Typematic Rate(Chars/Sec) 6 Pass Typematic Delay(MSEC) 250 Pass Security Option Setup Pass APIC Mode Enabled Pass MPS Version Control For OS 1.4 Pass OS Select For DRAM>64MB Non-OS2 Pass Video BIOS Shadow Enabled Pass Summary Screen Show Disabled Pass CHIPSET FEATURES SETUP DRAM Clock/Drive Control Press Enter Pass Current FSB Frequency 133 MHZ Pass Current DRAM Frequency 133 x 2 MHZ Pass DRAM Clock By SPD Pass DRAM Timing By SPD Pass x SDRAM CAS Latency 2.5 Pass x Bank Interleave Disabled Pass x Precharge to Active(Trp) 3T Pass x Active to Precharge(Tras) 6T Pass x Active to CMD(Trcd) 3T Pass DRAM Burst Length 4 Pass DRAM Queue Depth 4 level Pass DRAM Command Rate 2T Command Pass AGP & P2P Bridge Control Press Enter Pass AGP Aperture Size 64M Pass 8