Biostar M7VIP M7VIP compatibility test report - Page 9
Power Management Setup, Pnp / Pci Configuration - bios
View all Biostar M7VIP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
AGP Mode 4X Pass AGP Driving Control AUTO Pass x AGP Driving Value DA Pass AGP Fast Write Disabled Pass AGP Master 1 WS Write Disabled Pass AGP Master 1 WS Read Disabled Pass CPU & PCI Bus Control Press Enter Pass PCI 1Master 0 WS Write Enabled Pass PCI 2Master 0 WS Write Enabled Pass PCI1 Post Write Enabled Pass PCI2 Post Write Enabled Pass PCI Delay Transaction Enabled Pass Memory Hole Disabled Pass System BIOS Cacheable Disabled Pass Video RAM Cacheable Disabled Pass POWER MANAGEMENT SETUP ACPI function Enabled Pass ACPI Suspend Type S1(POS) Pass Power Management Option User Define Pass HDD Power Down Disabled Pass Suspend Mode Disabled Pass Video Off Option Suspend -> Off Pass Video Off Method V/H SYNC+Blank Pass MODEM Use IRQ 3 Pass Soft-Off by PWRBTN Instant-Off Pass Run VGABIOS if S3 Resume Auto Pass State After Power-Failure OFF Pass Wake Up/Power On Control Press Enter Pass PowerOn by PCI Card Disabled Pass Wake Up On LAN/Ring Disabled Pass RTC Alarm Resume Disabled Pass Date (of Month) 0 Pass Resume Time (hh:mm:ss) 0 : 0: 0 Pass Reload Global Timer Event Press Enter Pass VGA OFF Pass LPT & COM LPT/COM Pass HDD & FDD ON Pass PCI Master Off Pass PnP / PCI CONFIGURATION PnP OS Installed NO Pass Reset Configuration Data Disabled Pass Resources Controlled By Auto(ESCD) Pass IRQ Resources Press Enter Pass 9