Biostar M7VKQ M7VKQ compatibility test report - Page 57
At the next menu , type B to Enable Stop Clock Throttling
View all Biostar M7VKQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
CPU CH 1 Condition Vcore Transient Test(Dos Mode) Athlon(TM) XP 1900+ M\B VKQ/0.92 STPCLK pin waveform CH 2 Vcore waveform 7.Boot the system to the Win98SE environment(Command Prompt Only) Dos mode and run the stpclk.bat 8.At the main menu ,type "U" to go to the "Utilities Submenu" 9.At the next menu , type "B" to "Enable Stop Clock Throttling" 10. At this menu , type "7" to enable Stop Clock Throttling at the rang of 50.0%~65.0% 11. Press twice and then "Y" to exit the stpclk.bat program 12. Measure the Vcore waveform Vcore Transient waveform RESULT PASS 57
57
Vcore Transient Test(Dos Mode)
CPU
Athlon(TM)
XP
1900+
M\B
VKQ/0.92
CH 1
STPCLK pin waveform
CH 2
Vcore waveform
Condition
7.Boot the system to the Win98SE environment(Command Prompt Only)
Dos mode and run the stpclk.bat
8.At the main menu ,type “U” to go to the “Utilities Submenu”
9.At the next menu , type “B” to “Enable Stop Clock Throttling”
10.
At this menu , type “7” to enable Stop Clock Throttling at the rang of
50.0%~65.0%
11.
Press <ESC> twice and then “Y” to exit the stpclk.bat program
12.
Measure the Vcore waveform
Vcore Transient waveform
RESULT
PASS