Biostar M7VKQ M7VKQ compatibility test report - Page 68
Press <ESC> twice and then Y to exit the stpclk.bat program.
View all Biostar M7VKQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
CPU CH1 Condition Vcore Ripple Test(Open up the DOS Editor) Athlon XP 2000+ M\B VKQ/1.1 STP CLK CH3 Vcore 1.Boot the system to the Win98SE environment(Command Prompt Only) Dos mode and run the stpclk.bat 2.At the main menu ,type "U" to go to the "Utilities Submenu" 3.At the next menu , type "B" to "Enable Stop Clock Throttling" 11. At this menu , type "7" to enable Stop Clock Throttling at the rang of 50.0%~65.0% 12. Press twice and then "Y" to exit the stpclk.bat program. 13. Type "EDIT" to enter the "EDIT" program. Press "Alt+F" to open up a Pop-up menu. 7.Measure the Vcore waveform Vcore Transient waveform RESULT PASS 68
68
Vcore Ripple Test(Open up the DOS Editor)
CPU
Athlon
XP
2000+
M\B
VKQ/1.1
CH1
STP CLK
CH3
Vcore
Condition
1.Boot the system to the Win98SE environment(Command Prompt Only)
Dos mode and run the stpclk.bat
2.At the main menu ,type “U” to go to the “Utilities Submenu”
3.At the next menu , type “B” to “Enable Stop Clock Throttling”
11.
At this menu , type “7” to enable Stop Clock Throttling at the rang of
50.0%~65.0%
12.
Press <ESC> twice and then “Y” to exit the stpclk.bat program.
13.
Type “EDIT” to enter the “EDIT” program. Press “Alt+F” to open up a
Pop-up menu.
7.Measure the Vcore waveform
Vcore Transient waveform
RESULT
PASS