Biostar TA990FXE Bios Manual

Biostar TA990FXE Manual

Biostar TA990FXE manual table of contents:

  • Biostar TA990FXE | Bios Manual - Page 1
    TA990FXE UEFI BIOS Manual UEFI BIOS Setup...1 1 Main Menu ...3 2 Advanced Menu...4 3 Chipset Menu ...15 4 Boot Menu...21 5 Security Menu ...23 6 O.N.E Menu...24 7 Exit Menu ...33 i
  • Biostar TA990FXE | Bios Manual - Page 2
    TA990FXE UEFI BIOS Manual UEFI BIOS Setup Introduction The purpose of this manual is to describe the ... and settings in UEFI BIOS Setup. Plug and Play Support This AMI UEFI BIOS supports the ... AMI ACPI UEFI BIOS support Version 1.0/2.0 of Advanced Configuration and Power interface specification (ACPI...
  • Biostar TA990FXE | Bios Manual - Page 3
    TA990FXE UEFI BIOS Manual Supported CPUs This AMI UEFI BIOS supports the AMD CPU. Using Setup When starting up the computer, press during the Power-On Self-Test (POST) to enter the UEFI BIOS setup utility. In the UEFI BIOS setup utility, you will see General Help description at the ...
  • Biostar TA990FXE | Bios Manual - Page 4
    TA990FXE UEFI BIOS Manual 1 Main Menu Once you enter AMI UEFI BIOS Setup Utility, the Main Menu will appear on the screen providing an overview of the basic system information. BIOS Information Shows system information including UEFI BIOS version, Project Code, Model Name, Build Date, etc....
  • Biostar TA990FXE | Bios Manual - Page 5
    TA990FXE UEFI BIOS Manual 2 Advanced Menu The Advanced Menu allows you to configure the settings of CPU, Super I/O, Power Management, and other system devices. Notice z Beware of that setting inappropriate values in items of this menu may cause system to malfunction. PCI Subsystem Settings 4
  • Biostar TA990FXE | Bios Manual - Page 6
    TA990FXE UEFI BIOS Manual PCI ROM Priority In case of multiple option ROMs (Legacy and EFI Compatible), this item specifies what PCI Option ROM to launch Options: Legacy ROM (Default) / EFI Compatible ROM PCI Latency Timer This item sets the value to be programmed into PCI Latency Timer ...
  • Biostar TA990FXE | Bios Manual - Page 7
    TA990FXE UEFI BIOS Manual Maximum Payload This item sets Maximum Payload of PCI Express Device or allows System BIOS to select the value. Options: Auto (Default) / 128 Bytes / 256 Bytes / 512 Bytes / 1024 Bytes / 2048 Bytes / 4096 Bytes Maximum Read Request This item sets Maximum Read ...
  • Biostar TA990FXE | Bios Manual - Page 8
    TA990FXE UEFI BIOS Manual ACPI Sleep State This item selects the highest ACPI sleep state the system will enter when the SUSPEND button is pressed. ... show only when Keyboard PowerOn is set "Stroke Key." Options: Wake Key (Default) / Power Key / Ctrl+F1 / Ctrl+F2 / Ctrl+F3 / Ctrl +F4 / Ctrl+F5...
  • Biostar TA990FXE | Bios Manual - Page 9
    TA990FXE UEFI BIOS Manual Specific Key Enter This item will show only when Keyboard PowerOn is set "Specific Key." Press Enter to... idle. Options: Disabled (Default) / Enabled SVM This item allows you to enable AMD virtualization in CPU. This secure virtual mode will let your run multiple OS (...
  • Biostar TA990FXE | Bios Manual - Page 10
    TA990FXE UEFI BIOS Manual PowerNow This item allows you to enable or disable the generation of ACPI_PPC, _PSS, and _PCT objects. Options: Enabled (Default) / Disabled SATA Configuration The BIOS will automatically detect the presence of SATA devices. There is a sub-menu for each SATA device...
  • Biostar TA990FXE | Bios Manual - Page 11
    TA990FXE UEFI BIOS Manual CPU Smart FAN This item allows you to control the CPU Smart Fan function. Options: Disabled (...Control Mode This item provides several operation modes of the fan. Options: Quiet / Aggressive / Manual Fan Ctrl OFF(℃) When CPU temperature is lower than this value, the...
  • Biostar TA990FXE | Bios Manual - Page 12
    TA990FXE UEFI BIOS Manual USB Configuration Legacy USB Support This item determines if the BIOS should provide legacy support for USB devices like the keyboard, mouse, and USB drive. This is a useful feature when using such USB devices with operating systems that do not natively support USB...
  • Biostar TA990FXE | Bios Manual - Page 13
    TA990FXE UEFI BIOS Manual Super IO Configuration Restore AC Power Loss This setting specifies how your system should behave after a power fail or interrupts occurs. Power Off: Leaving the system in power-off status after power recovers. Power ON: Powering on the system immediately when ...
  • Biostar TA990FXE | Bios Manual - Page 14
    TA990FXE UEFI BIOS Manual Serial Port This item enables or disables Serial Port (COM). Options: Enabled (Default) / Disabled Change Settings This item selects an optimal setting for Super IO device. Options: Auto (Default) / IO=3F8h; IRQ=4 / IO=3F8h; IRQ=3,4,5,6,7,10,11,12 / IO=2F8h; IRQ...
  • Biostar TA990FXE | Bios Manual - Page 15
    TA990FXE UEFI BIOS Manual H/W Monitor Shutdown Temperature This item allows you to set up the CPU shutdown Temperature. Options: Disabled (Default) / 70℃ /158℉ / 75℃ /167℉ / 80℃ /176℉ / 85℃ /185℉ / 90℃/194℉ 14
  • Biostar TA990FXE | Bios Manual - Page 16
    TA990FXE UEFI BIOS Manual 3 Chipset Menu This section describes configuring the PCI bus system. PCI, or Personal Computer Interconnect, is a system which allows I/O devices to operate at speeds nearing the speed of the CPU itself uses when communicating with its own special components. ...
  • Biostar TA990FXE | Bios Manual - Page 17
    TA990FXE UEFI BIOS Manual RD990 IOMMU This item allows you to enable/disable RD990 IOMMU. Options: Disabled (Default) / Enabled RD990 Port #2/#4/#10/#11 Port Enable Options: Auto (Default) / Enable / Disable Gen2 High Speed Mode Options: GEN2 Autonomous (Default) / GEN1 / GEN2 Software ...
  • Biostar TA990FXE | Bios Manual - Page 18
    TA990FXE UEFI BIOS Manual South Bridge Configuration SB SAT A Configuration S OnChip SATA Channel This option allows you to enable the on-chip Serial ATA. Options: Enabled (Default) / Disabled OnChip SATA Type This option allows you to select the on-chip Serial ATA operation mode. Options:...
  • Biostar TA990FXE | Bios Manual - Page 19
    TA990FXE UEFI BIOS Manual SATA IDE Combined Mode This option controls the SATA/PATA combined mode. Options: Enabled (Default) / Disabled SATA-III Mode This option allows you to limit SATA Capability. Options: Auto (Default) / Force Max Gen2 SB USB Configuration OHCI HC (Bus 0 Dev 18/19/20/...
  • Biostar TA990FXE | Bios Manual - Page 20
    TA990FXE UEFI BIOS Manual SB Azalia Audio Configuration HD Audio Azalia Device This item allows you to control the HD audio device. Options: Enabled (Default) / Auto / Disabled Onboard PCI-E Devices Launch PXE OpROM This item enables/disables Boot Option for Legacy Network Devices. ...
  • Biostar TA990FXE | Bios Manual - Page 21
    TA990FXE UEFI BIOS Manual Launch Storage OpROM This item enables/disables Boot Option for Legacy Mass Storage Devices with Option ROM. Options: Enabled (Default) / Disabled Atheros PCIE NIC This item enables/disables Atheros PCIE NIC. Options: Enabled (Default) / Disabled VT6315N 1394 This ...
  • Biostar TA990FXE | Bios Manual - Page 22
    TA990FXE UEFI BIOS Manual 4 Boot Menu This menu allows you to setup the system boot options. Setup Prompt Timeout This item sets ...Enabled (Default) / Disabled GateA20 Active Upon Request - FA20 can be disabled using BIOS services. Always - do not allow disabling GA20; this option is useful ...
  • Biostar TA990FXE | Bios Manual - Page 23
    TA990FXE UEFI BIOS Manual Option ROM Messages This item sets the display mode for option ROM. Options: Force BIOS (Default) / ... (Default) / Enabled BOOT SUCCESS BEEP When this item is set to Enabled, BIOS will let user know boot success with beep. Options: Enabled (Default) / Disabled Boot ...
  • Biostar TA990FXE | Bios Manual - Page 24
    TA990FXE UEFI BIOS Manual 5 Security Menu Administrator Password This item sets Administrator Password. User Password This item sets User Password. 23
  • Biostar TA990FXE | Bios Manual - Page 25
    TA990FXE UEFI BIOS Manual 6 O.N.E Menu This submenu allows you to change voltage and clock of various devices. (However,... beginners in overclock field. Based on many test and experiments from Biostar Engineer Team, OverClock Navigator provides 3 default overclock configurations that are able ...
  • Biostar TA990FXE | Bios Manual - Page 26
    TA990FXE UEFI BIOS Manual Auto OverClock System The Overclock Navigator provides 3 different engines helping you to overclock your system. These ...This engine will make a best over-clock performance. CPU Clock This item allows BIOS to select CPU Clock (MHz). Options: 200 (Default) / 200~600 ...
  • Biostar TA990FXE | Bios Manual - Page 27
    TA990FXE UEFI BIOS Manual CPU Vcore This item allows you to select CPU Voltage Control. CPU-NB Over Voltage This item allows you to select CPU-NB Voltage Control. Memory Over Voltage This item allows you to select Memory Voltage Control. NB Over Voltage This item allows you to select NB ...
  • Biostar TA990FXE | Bios Manual - Page 28
    TA990FXE UEFI BIOS Manual BIOSTAR Memory Insight DDR3_A1/A2/B1/B2 These items display SPD information of DDR3 memory. 27
  • Biostar TA990FXE | Bios Manual - Page 29
    TA990FXE UEFI BIOS Manual HT Configuration HT Frequency Options: Auto (Default) / 200MHz / 400MHz / 600MHz / 800MHz / 1000MHz / 1200MHz / 1400MHz / 1600MHz / 1800MHz / 2000MHz HT Width Options: Auto (Default) / 8 Bit / 16 Bit DRAM Timing Configuration 28
  • Biostar TA990FXE | Bios Manual - Page 30
    TA990FXE UEFI BIOS Manual MCT Timing Mode This item allows you to select the DRAM Frequency programming method. If Auto, the ... be programmed regardless of SPD. Options: Auto (Default) / Limit / Manual Memclock Value This item allows you to set the Memory Clock. Options: DDR 800 (Default) / ...
  • Biostar TA990FXE | Bios Manual - Page 31
    TA990FXE UEFI BIOS Manual TWR Options: TRRD Options: TWT R Options: Auto (Default) / 4~7 CLK Auto (Default) / 4~7 CLK Auto (Default) / 5~8 / 10 / 12 CLK MCT Configuration Bank Interleaving Bank Interleaving is an advanced chipset technique used to improve memory performance. Memory ...
  • Biostar TA990FXE | Bios Manual - Page 32
    TA990FXE UEFI BIOS Manual Clock to All DIMMs This item enables unused clocks to DIMMs even memory slots are not populated. Options: Disabled (Default) / Enabled MemClk Tristate C3/ATLVID This item enables or disables the MemClk Tristate function in C3 Mode. Options: Disabled (Default) / ...
  • Biostar TA990FXE | Bios Manual - Page 33
    TA990FXE UEFI BIOS Manual G.P.U Phase Control G.P.U Phase Mode This item allows you to control G.P.U Phase Mode (power saving technology). Options: Auto (Default) / Off 32
  • Biostar TA990FXE | Bios Manual - Page 34
    TA990FXE UEFI BIOS Manual 7 Exit Menu This menu allows you to load the optimal default settings, and save or discard...the system after saving the changes. Restore Defaults This selection allows you to reload the BIOS when problem occurs during system booting sequence. These configurations are...
  • Biostar TA990FXE | Bios Manual - Page 35
    TA990FXE UEFI BIOS Manual Saving SetupData to Profile This item saves your current BIOS Setup Data to profile 1 ~ 5. Restoring SetupData from Profile This item restore your BIOS Setup Data from profile 1 ~ 5. 34



Type your new search above

The manual viewer requires the flash plugin to be installed and enabled.
To view this page ensure that Adobe Flash Player version 10 or greater is installed.

Biostar TA990FXE Manual