Biostar TZ68K Bios Manual - Page 28
CPU C1E, Graphics Core Ratio Limit, DDR3 DRAM Multiplier, DRAM Timing Control, DRAM Command Rate,
View all Biostar TZ68K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
TZ68K+ UEFI BIOS Manual CPU C1E C1E is "Enhanced Halt State" function, this function helps to save power and decrease heat by lowering CPU frequency while the processor is not working. Options: Enabled (Default) / Disabled Graphics Core Ratio Limit This item sets Graphics Core Ratio Limit. Options: 25 (Default) DDR3 DRAM Multiplier This item allows you to set DDR3 DRAM Multiplier. Options: Auto (Default) / 10.67 / 13.33 / 16 / 18.67 / 21.33 DRAM Timing Control This item allows you to choose to manually or automatically regulate the DRAM Timing. Options: By SPD (Default) / Manual / XMP Profile 1 / XMP Profile 2 DRAM Command Rate This item allows you to select command rate of DDR3. Options: Auto (Default) / 1T / 2T CAS# Latency (tCL) This item allows you to select CAS Latency of DDR3. Options: 9 (Default) / 3 ~ 15 Row Precharge Time (tRP) This item allows you to select Row Precharge Time of DDR3. Options: 9 (Default) / 3 ~ 15 RAS# to CAS# Dela y (tRCD) This item allows you to select Row Address to Column Address Delay of DDR3. Options: 9 (Default) / 3 ~ 15 27