Bissell CrossWave All-in-One Multi-Surface Cleaner 1785 User Guide - Page 11
Cleaning the Brush Roll and, Brush Chamber
View all Bissell CrossWave All-in-One Multi-Surface Cleaner 1785 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Maintenance: Cleaning the Brush Roll and Brush Chamber WARNING To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting. 1 Grasp brush 2 Pull brush roll roll window at out by grabbing the front and the brush roll pull upward to tab and pulling remove. upward. 3 4 5 With warm water, rinse your brush roll window and brush roll. If your brush roll chamber is dirty, clean with a rag or towel. Let your brush roll and brush roll window chamber dry before reassembling. TIP: Running your machine with a wet brush roll will help the brush roll dry faster. The trigger should not be pressed. NOTE: The brush roll is not dishwasher or automatic washing machine safe. Please follow cleaning instructions. 6 7 Replace brush roll by inserting the brush roll end into the right side of the foot. Then lock the pull tab into place by pressing downward. Replace the brush roll window by first lining up both brush window tabs with the edges of the foot. Then press the window back into place until you hear a click. www.BISSELL.com 11