Bissell CrossWave Cordless Multi-Surface Wet Dry Vac 2551 User Guide - Page 9

Using the 3-in-1 Docking Station cont.

Get Bissell CrossWave Cordless Multi-Surface Wet Dry Vac 2551 PDF manuals and user guides View all Bissell CrossWave Cordless Multi-Surface Wet Dry Vac 2551 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

Using the 3-in-1 Docking Station (cont.) WARNING To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting. 7 8 9 Pull Brush Roll out by grabbing the Brush Roll tab and pulling upward. 10 Place the Brush Roll upright in the Brush Roll Drying Tray to dry. Remove the unit from the 3-in-1 Docking Station and wipe out the tray. Do NOT rinse under faucet directly to avoid water going into the charging plug for safety issues. Replace Brush Roll by inserting the Brush Roll end into the right side of the foot. Then lock the pull tab into place by pressing downward. 11 click Replace the Brush Roll Window by first lining up the window tabs with the edges of the foot. Then press the window back into place until you hear a "click". Machine Storage Put the unit away in a closet or basement until the next use. Store cleaner in a protected, dry area. NOTE: Any solution remaining in the Clean Water Tank should be emptied prior to machine storage. NOTICE To reduce the risk of a leaking condition, do not store unit where freezing may occur. Damage to internal components may result. www.BISSELL.com 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
www.BISSELL.com
9
9
7
8
Pull Brush Roll out
by grabbing the
Brush Roll tab and
pulling upward.
Place the Brush Roll
upright in the Brush
Roll Drying Tray to dry.
Remove the unit from the 3-in-1
Docking Station and wipe out the
tray. Do NOT rinse under faucet
directly to avoid water going into
the charging plug for safety issues.
Using the 3-in-1 Docking Station (cont.)
WARNING
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from electrical
outlet before performing maintenance or troubleshooting.
11
10
Replace the Brush Roll Window by first lining up the window tabs with the edges of
the foot. Then press the window back into place until you hear a “click”.
Replace Brush Roll by inserting
the Brush Roll end into the
right side of the foot. Then
lock the pull tab into place by
pressing downward.
Machine Storage
Put the unit away in a closet or basement until the next use. Store cleaner in a protected,
dry area.
NOTE:
Any solution remaining in the Clean Water Tank should be emptied prior to
machine storage.
click
NOTICE
To reduce the risk of a leaking condition, do not store unit where freezing may occur. Damage to internal
components may result.