Bissell Momentum® Vacuum User Guide - English

Bissell Momentum® Vacuum Manual

Bissell Momentum® Vacuum manual content summary:

  • Bissell Momentum® Vacuum | User Guide - English - Page 1
    BISSELL Rewards! Register your product today! See details on back page USER'S GUIDE 82G7 SERIES 2 Thank You 3 Safety Instructions 4 Product View 5-6 Assembly 6-9 Operations 10-16 Maintenance and Care 17 Troubleshooting 18 Replacement Parts 19 Warranty 20 Product Registration 20 Consumer Services
  • Bissell Momentum® Vacuum | User Guide - English - Page 2
    , so, should you ever have a problem, you'll receive fast, considerate assistance. My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is a global leader in the design, manufacture, and service of high quality homecare products like your BISSELL vacuum. Thanks again, from all of
  • Bissell Momentum® Vacuum | User Guide - English - Page 3
    such as cigarettes, matches, or hot ashes. ■ Do not use without filters in place. ■ Use only on dry, indoor surfaces. ■ Keep appliance on a level surface. ■ Do not carry the vacuum cleaner while it is running. SAVE THESE INSTRUCTIONS FOR FUTURE USE THIS APPLIANCE HAS A POLARIZED PLUG. To reduce the
  • Bissell Momentum® Vacuum | User Guide - English - Page 4
    Empty™ Dirt Container Washable Pre-Motor Filter Headlight HEPA Media Post Motor Filter Lock 'n Seal® Lever Wide Cleaning Foot Handle Release Pedal Height Adjustment Knob Foot Window Scuff Resistant Bumper 4 www.bissell.com Quick Release™ Cord Wraps Curved Hose Wand Hose Wand Base 800.237.7691
  • Bissell Momentum® Vacuum | User Guide - English - Page 5
    by inserting the screw provided. 7. 7. Attach the lower hose clip by snapping it into place and twisting to the right. CAUTION: Do not plug in your vacuum until you are familiar with all instructions and operating procedures. 2. 3. 6. www.bissell.com WARNING: Plastic film can be dangerous. To
  • Bissell Momentum® Vacuum | User Guide - English - Page 6
    Hose Wand bag and filters. NOTICE: For above floor cleaning, the floor brush will continue to rotate but is raised above floor. To prevent carpet damage, do not lean on the vacuum or let the powerfoot tilt forward. 6 www.bissell.com caution: To avoid personal injury and to prevent the cleaner
  • Bissell Momentum® Vacuum | User Guide - English - Page 7
    furniture, check area first for objects that might harm the unit or block the vacuum hose. Height adjustment There are seven height settings available for various floor surfaces. Turn the dial on the foot of the cleaner to the desired setting. Lowest setting - For low pile carpet or bare floors
  • Bissell Momentum® Vacuum | User Guide - English - Page 8
    red. If the indicator turns black, it means you have a clog in your hose. To check and remove the clog, follow instructions on page 15 to check for and clear clogs. Clean Filter Indicator NOTICE: While vacuuming, certain carpets and low humidity conditions may generate small static discharges. The
  • Bissell Momentum® Vacuum | User Guide - English - Page 9
    Curved Hose Wand: To use your vacuum, remove the cord part of the upper cord wrap where you can attach the cord when vacuuming. 2. When you are finished cleaning, turn vacuum cleaner on rear of vacuum cleaner. Be sure parts, always move the cleaner with the carrying handle. Always place vacuum cleaner
  • Bissell Momentum® Vacuum | User Guide - English - Page 10
    filter cleaning may be necessary if you are vacuuming new carpet, fine dust, or have allergy concerns. Follow the instructions troubleshooting checks. Tip: To maximize cleaning performance, check and clean or replace all filters straight out to remove from the vacuum. 4. Empty dirt into garbage
  • Bissell Momentum® Vacuum | User Guide - English - Page 11
    the door, remove the filter and replace. NOTE: The post-motor filter is a white, pleated HEPA media filter. This filter is not washable and must be replaced when it becomes dirty. WARNING: Do not operate cleaner with damp or wet filters or without all filters in place. www.bissell.com 11 800.237
  • Bissell Momentum® Vacuum | User Guide - English - Page 12
    cover. 1. Unplug the vacuum from electrical outlet. WARNING: To reduce the risk of injury from moving parts, turn vacuum cleaner off and disconnect power and other debris from the motor pulley and drive belt areas. Motor Pulley 7. Check the drive belt carefully for wear, cuts or stressed areas.
  • Bissell Momentum® Vacuum | User Guide - English - Page 13
    With the rotating floor brush removed from the vacuum cleaner (Steps 1-4 of check rotating floor brush and drive belt on page 12), grasp the old drive belt and remove from the motor pulley. 3. Discard the old drive belt. Motor 3. Place the new drive belt over the motor Pulley pulley and loop
  • Bissell Momentum® Vacuum | User Guide - English - Page 14
    2. around the brush. 1. Unplug the vacuum from electrical outlet. 2. Remove TurboBrush tool from the end of hose. 3. If a clog is present or debris from the brush, remove the brush from the drive belt and clean debris. 5. Reposition the drive belt on the brush. Place ends of brush in slots on
  • Bissell Momentum® Vacuum | User Guide - English - Page 15
    motor filter. Reattach tube by first installing the base and then push in the top of the tube. 8. If the clog persists, follow the instructions for checking the rotating floor brush and drive belt on page 12 and inspect the air passageway for obstructions. www.bissell.com 2. 5. Twist n' Snap Hose
  • Bissell Momentum® Vacuum | User Guide - English - Page 16
    Maintenance and care Cleaning the upper tank 3. 1. Unplug the vacuum from electrical outlet. 2. Remove the dirt container as instructed in "Empty Dirt Container" on page 10. 3. Flip separator plate position. 7. Replace the dirt container. 6. Debris Barrier 16 www.bissell.com 800.237.7691
  • Bissell Momentum® Vacuum | User Guide - English - Page 17
    and post-motor filters for correct installation 3. Dirt container installed incorrectly 3. Pull out and re-insert dirt container correctly Other maintenance or service not included in the manual should be performed by an authorized service representative. Thank you for selecting a BISSELL product
  • Bissell Momentum® Vacuum | User Guide - English - Page 18
    Replacement parts - BISSELL vacuum You may purchase parts from your retailer, by calling BISSELL Consumer Services or by visiting our website. Below is a list of common replacement parts. While not all of these parts may have come with your specific model, they are available for purchase if
  • Bissell Momentum® Vacuum | User Guide - English - Page 19
    - BISSELL Momentum® Cyclonic Vacuum This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Services
  • Bissell Momentum® Vacuum | User Guide - English - Page 20
    bissell.com/registration now! BISSELL consumer services For information about repairs or replacement parts, or questions about your warranty, call: BISSELL Consumer Services Services Or visit the BISSELL website - www.bissell.com When contacting BISSELL, have model number of cleaner available
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20

2
Thank You
USER'S GUIDE
82G7 SERIES
Safety Instructions
Product View
Assembly
Operations
Maintenance and Care
Troubleshooting
Consumer Services
Replacement Parts
3
4
5-6
6-9
10-16
17
20
18
Warranty
Product Registration
19
20
Earn BISSELL Rewards!
R
egister your
product today!
See details on
back page