Bissell Momentum® Vacuum User Guide - English - Page 7

Operations 1. Handle positions Press the handle release pedal, located on the lower left side of the vacuum, with your foot to place your vacuum into one of three cleaning positions. 1. Upright - For storage and above floor cleaning with tools. 2. 3. 2. Normal Cleaning - Press handle release pedal once. Position used for most household floor cleaning tasks. 3. Low Cleaning - With the vacuum in normal cleaning position, press handle release pedal again. Use for reaching under low furniture such as tables, chairs or beds. Tip: Before cleaning under low furniture, check area first for objects that might harm the unit or block the vacuum hose. Height adjustment There are seven height settings available for various floor surfaces. Turn the dial on the foot of the cleaner to the desired setting. Lowest setting - For low pile carpet or bare floors. To pick up debris it may be necessary to move up one setting. Medium settings - For medium pile carpet. High setting - For high pile and most shag carpet. Note: For optimal carpet cleaning performance, adjust to the lowest practical setting. If your cleaner is difficult to push, adjust to the next higher setting. If the dial is difficult to turn, tilt the cleaner back slightly to take the weight off the foot while turning. Transporting cleaner right way to carry wrong way to carry 2. 1. To move your cleaner from room to room, put the handle in the upright position, tilt the cleaner back on its rear wheels and push forward. 2. The cleaner can also be moved by using the carrying handle. www.bissell.com 7 800.237.7691