Bissell Momentum® Vacuum User Guide - English - Page 8

Operations Clean filter indicator Select Models Only The clean filter indicator tells you when the air flow in your vacuum is reduced due to dirty filters or a clog in the hose. The clean filter indicator will remain green until the airflow is reduced. At that time, it begins to change to red or black. When it is fully red, the airflow is significantly reduced or clogged by a dirty filter. Follow the steps on page 11 to clean your filters. All filters in the vacuum should be cleaned or replaced when the clean filter indicator turns red. If the indicator turns black, it means you have a clog in your hose. To check and remove the clog, follow instructions on page 15 to check for and clear clogs. Clean Filter Indicator NOTICE: While vacuuming, certain carpets and low humidity conditions may generate small static discharges. The discharges are entirely harmless and are not associated in any way with the main power supply. NOTE: When your vacuum is turned off, the clean filter indicator will go to the red color setting. The Dusting Brush/ clean filter indicator only detects Upholstery Tool reductions in airflow when the vacuum power is on. Special on-board tools Crevice Tool Your vacuum is not only a power- Extension Wand ful carpet and rug cleaner, it's also a versatile above floor vacuum cleaner when you select one of the special tools. Curved Hose Wand 1. Raise the handle to the upright position. 2. Grasp the curved hose wand handle to separate from hose wand base. 3. Attach tools by firmly pushing onto vacuum hose, curved hose wand or extension wand. They are a friction fit, so be sure the hose and tool fit snuggly together. Dusting Brush/Upholstery Tool: Two types of cleaning tools in one attachment. • Use the dusting brush to dust furniture, blinds, books, lamps, shelves and baseboards. Hose Wand Base • Slide the brush off to use the upholstery tool on cushions, draperies and fabrics. 8 www.bissell.com 800.237.7691