Bissell Pet Hair Eraser® Cyclonic Canister Vacuum 66T6 User's Guide - Page 9

Maintenance and care Emptying the dirt cup 1. Turn vacuum OFF ( ). Unplug the vacuum from electrical outlet. 2. Open the dirt cup compartment by lifting up the door latch on the front of the vacuum. 3. Lift the dirt cup assembly out from the vacuum. 4. Remove the top cover from the dirt cup assembly by unfastening the latch, raising the front edge and removing the top cover from of the rear hinges. Set the top cover aside. 4a. 5. Empty the dirt into a garbage container. 6. To reattach the top cover on the dirt cup, align the slots on the top cover with the hinges on the dirt cup and rotate the front cover down to the closed position. Then fasten the latch. 7. Place the dirt cup back into the vacuum. 8. Close dirt cup compartment door and press down gently until it locks into place. NOTE: The compartment door will not close without the dirt cup in place. 2. 4b. 6. WARNING: To reduce the risk of electric shock, turn power switch OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks. www.bissell.com 800.237.7691 196