Bissell PowerForce Compact 1520 User Guide

Bissell PowerForce Compact | 1520 Manual

Get Bissell PowerForce Compact | 1520 PDF manuals and user guides View all Bissell PowerForce Compact | 1520 manuals
Add to My Manuals
Save this manual to your list of manuals

Bissell PowerForce Compact | 1520 manual content summary:

  • Bissell PowerForce Compact | 1520 | User Guide - Page 1
    1520 SERIES POWERFORCE® COMPACT
  • Bissell PowerForce Compact | 1520 | User Guide - Page 2
    vacuum cleaner when it is plugged in. Unplug from outlet when not in use and before servicing. parts of body away from openings and moving parts. » Turn off all controls before plugging or unplugging vacuum matches, or hot ashes. » Do not use without filters in place. » Do not pick up hard or
  • Bissell PowerForce Compact | 1520 | User Guide - Page 3
    of high quality homecare products like your BISSELL vacuum. Thanks again, from all of us at BISSELL. Safety Instructions 2 Product View 4 Assembly 5 Operations 6-7 Maintenance & Care 8-12 Troubleshooting 13 Replacement Parts 14 Warranty 15 Service 15 Product Registration 16 Consumer Care
  • Bissell PowerForce Compact | 1520 | User Guide - Page 4
    plug in your vacuum cleaner until you are familiar with all instructions and operating procedures. WARNING To reduce the risk of electric shock, turn power switch off and disconnect polarized plug from electrical outlet before performing maintenance or troubleshooting checks. 4 www.BISSELL.com
  • Bissell PowerForce Compact | 1520 | User Guide - Page 5
    , as well as maintenance and troubleshooting instructions. Please read this guide thoroughly before assembling your vacuum cleaner. Pay particular attention to the product diagram, assembly instructions, and part names. Locate and organize all parts before assembly. Familiarize yourself with
  • Bissell PowerForce Compact | 1520 | User Guide - Page 6
    Operations Special tools Your BISSELL vacuum is not only a powerful carpet and rug vacuum cleaner, it's also a versatile above floor vacuum cleaner when you select one of the special tools. 1. Raise handle to upright position. 2. Grasp hose and remove from hose holder. 3. Attach tools by firmly
  • Bissell PowerForce Compact | 1520 | User Guide - Page 7
    the vacuum. vacuum without these filters. ATTENTION Some berber carpets have a tendency to fuzz with wear. Repeated strokes in the same area may enhance this condition. WARNING The rotating floor brush continues to rotate while tools are in use. To reduce the risk of injury from moving parts vacuum
  • Bissell PowerForce Compact | 1520 | User Guide - Page 8
    hair or debris that might interfere with the suction power. NOTE: More frequent filter cleaning or replacement may be necessary if you are vacuuming new carpet, fine dust, or have allergy concerns. Follow the instructions on the following pages to perform these simple maintenance steps. Emptying the
  • Bissell PowerForce Compact | 1520 | User Guide - Page 9
    are in place NOTICE While vacuuming, certain carpets and low humidity conditions may generate small static discharges. The discharges are entirely harmless and are not associated in any way with the main power supply. 2. 3. 4. 6. Filter Set half-circle locating features www.BISSELL.com 9
  • Bissell PowerForce Compact | 1520 | User Guide - Page 10
    dirt cup. Power cord storage When you have finished using your vacuum, store the power cord on the cord wraps. 1. Turn off vacuum cleaner and unplug power cord. 2. Loop power cord around cord WARNING Do not operate cleaner with damp or wet filters or without all filters in place. 10 www.BISSELL.com
  • Bissell PowerForce Compact | 1520 | User Guide - Page 11
    2. Place vacuum upside down with brush roll facing upwards. 3. Remove five screws as shown with a small Phillips screwdriver. 5. 4. Lift off brush cover. 5. Grasp floor brush at both ends and lift out. 6. Clean strings, hair and other debris from floor brush, motor pulley, and drive belt
  • Bissell PowerForce Compact | 1520 | User Guide - Page 12
    it. 3. Remove brush, then grasp old drive belt and remove from motor shaft. Discard old drive belt. 4. Loop new drive belt over motor shaft and stretch other end over floor brush . If properly installed, drive belt will align itself on floor brush. 7. Replace brush cover and five screws. Drive
  • Bissell PowerForce Compact | 1520 | User Guide - Page 13
    stretch hose where it connects to the hose elbow on the back of the vacuum. 2. Look to see if there is any debris in the hose and hose NOTE: If the debris cannot be reached through the hose, then follow the instructions for cleaning the air passageway in the "Clean and replace rotating floor brush"
  • Bissell PowerForce Compact | 1520 | User Guide - Page 14
    maintenance or troubleshooting checks. Problem Vacuum cleaner won't belt for any damage. For additional FAQs (Frequently Asked Questions) please visit Customer Support at Bissell.com. Please do not return this product to the store. Other maintenance or service not included in the manual
  • Bissell PowerForce Compact | 1520 | User Guide - Page 15
    defective or malfunctioning part. See information on "If your BISSELL product should require service". This warranty applies to product used for personal, and not commercial or rental service. This warranty does not apply to fans or routine maintenance components such as filters, belts, or brushes
  • Bissell PowerForce Compact | 1520 | User Guide - Page 16
    ll receive: BISSELL Rewards Points Automatically earn points for discounts and free shipping on future purchases. Faster Service Supplying your BISSELL.com/registration now! BISSELL Consumer Care For information about repairs or replacement parts, or questions about your warranty: Call: BISSELL
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
1520 SERIES
POWERFORCE
®
COMPACT