Bissell PowerForce Compact 1520 User Guide - Page 10

Maintenance & Care Cleaning the tank 1. Turn off vacuum and unplug it from electrical outlet. 2. 3. 2. Remove dirt container by pressing release button and pulling away from the vacuum by the handle. 3. Open dirt container lid by lifting release latch. Remove primary separator by lifting out of the dirt container. 4. The tank and separator can be washed by hand in warm water. Mild detergent may be used if desired. Rinse well then air dry completely before replacing. 5. Check hose inlet for any clogging. 5. 6. Reassemble the primary separator by centering the front symbol and twisting toward lock position, as shown. 7. Replace dirt cup. Power cord storage When you have finished using your vacuum, store the power cord on the cord wraps. 1. Turn off vacuum cleaner and unplug power cord. 2. Loop power cord around cord wraps on back of cleaner, making certain the Upper Quick Release cord wrap is pointed up towards the handle and the Lower Quick Release cord wrap is pointed down towards the floor. 3. Clip molded plug to power cord to secure. WARNING Do not operate cleaner with damp or wet filters or without all filters in place. 10 www.BISSELL.com