Bissell PowerFresh 2-IN-1 Multi Surface Steam Cleaner 2814 User Guide - Page 10

Troubleshooting WARNING To reduce the risk of electric shock, disconnect plug from electrical outlet before performing maintenance or troubleshooting checks. Problem Reduced steam OR no steam Streaking Leaking Knocking Noise Possible causes Water tank empty. Handle not installed properly. Foot not installed properly. Dirty Mop Pad. Use on waxed or oiled floor. Mop Pad is too wet. First use or water tank is empty. Remedies Refill tank. Push the Handle all the way into the unit until you hear a "click". Insert the body of the machine into the steam mop foot until you hear a "click". Remove and wash pad per instructions before further use. If you have used floor polishes or wax on your floors, steam products may decrease glossiness. Refer to the wax or polish manufacturer. If you don't wax or polish your floors, check the floor care instructions from your flooring manufacturer. Remove and replace with dry Mop Pad. Fill water tank and knocking will diminsh after a few seconds. 10 www.BISSELL.com