Bissell ProHeat Plus Upright Carpet Cleaner 17998 User Guide - Page 12

Rinsing Your Carpet (optional) 1 Rinsing is an optional step that can be done during the cleaning process by switching to the water rinse setting, or it can be done after the carpeted area has been cleaned. Choose the Water Rinse setting on the SmartMix® Dial, Be sure to rinse out your tank if Boost was added in with your water. Use the Water Rinse setting with water only. Follow the same path as you did for cleaning, taking care to do a forward (wet) stroke by pressing the trigger, a backward (wet) stroke, and a forward and backward (dry) stroke, releasing the trigger. Continue this until the water you see coming up the nozzle is clear. Emptying the 2-in-1 Tank 1 2 1- Press the Power Switch OFF. Remove the 2-in-1 Tank from the base by lifting up on the tank's carry handle. 2- Carry the tank like a bucket to where you'll dispose of the collection water. Rotate the carry handle to unlatch the lid and empty the tank. After each use, remove and rinse the lint screen located on the tank lid. NOTE: You may notice hair & debris deposits on the carpet or in the tank that were loosened by the cleaning action (especially with new carpet that may never have been deep cleaned before). This debris should be picked up and thrown away. To Continue Cleaning 3 1 2 1- Fill the 2-in-1 Tank again, following the instructions on pages 8 and 9. 2- Make sure the tank lid is secure and return the tank to the machine. Follow cleaning instructions on pages 10 and 11 to continue cleaning. *Don't forget to check the formula tank and refill as needed! 12 www.BISSELL.com Rinse (optional) Choose the Water Rinse setting on the SmartMix Dial and follow rinse instructions at the top of this page.