Bissell Symphony Pet 1543 User Guide - Page 10

Maintenance & Care Removing All Mop Pads 1. Unplug hard floor cleaner from electrical outlet. 2. Step on foot release for mop pad tray and lift unit off tray. 3. Carefully remove mop pad from the mop pad tray using the Quick Release™ Tab. The mop pad and tray may be hot. 4. Put the mop pad tray back down on the floor and set the unit back on top. It will click into place. 5. The microfiber mop pad can be machine washed in warm water. Use only liquid detergents. Do not use fabric softeners or bleach. For best results, air dry. 6. For Swiffer SteamBoost Pads® (select units), throw away after use. Do not flush. WARNING To reduce the risk of electric shock, turn power switch off and disconnect polarized plug from electrical outlet before performing maintenance or troubleshooting checks. CAUTION Upright storage of the cleaner with a wet mop pad may result in the formation of white marks on your floor. To remove the white marks, clean area with vinegar. 2. Empty Dirt Tank The dirt tank needs to be emptied when the dirt reaches the 'Full' line on the side of the tank. 2. 3. 1. Unplug hard floor cleaner from electrical outlet. 2. Remove the EasyEmpty™ dirt tank from the unit by moving the lock button on the front of the unit to the left. 3. The dirt tank has a built in Drop-it™ system for easy debris emptying. a. In the middle of the vacuum filter attached to the top of the dirt tank locate the color rod  b. Pull the rod up and lock the rod in place by turning it clockwise  c. Push down on the lever to force out stuck debris 3b. 3c.  d. When done, rotate the color rod counter-clock wise and push it down to return it to its original position 5. Mount the EasyEmpty™ dirt tank back on the vacuum base and push the lock button to the right until it is centered on the front of the unit. NOTE: The dirt tank may be washed in warm water with a mild detergent. Make sure it is completely dry before replacing. 10 www.BISSELL.com