Bissell Symphony Pet 1543 User Guide - Page 13

Cleaning Hose Tube, Cleaning Foot of Unit

Get Bissell Symphony Pet | 1543 PDF manuals and user guides View all Bissell Symphony Pet | 1543 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

Maintenance & Care Cleaning Hose Tube 1. Grab bottom end of the hose and pull lower portion away from the body. 2. Seperate the hose into two pieces. 3. Wash hose and wait for it to dry. 4. Align the top of the hose to the groves on the hose opening of the unit. 5. Twist hose down to insert lower portion of hose to the unit. 6. Make sure hose fits tightly into the unit. WARNING To reduce the risk of electric shock, turn power switch off and disconnect polarized plug from electrical outlet before performing maintenance or troubleshooting checks. 1. 3. 5. 6. Cleaning Foot of Unit 1. To clean the foot and bristles, push the release button on the back of the pivot joint and pull the 2. foot to release it from the appliance. 2. Wash bottom of foot and bristles with cold water. 3. Look for any clogging in the steam nozzle. To clean, run water over steam nozzle. NOTE: Make sure foot and bristles are dry before attaching the foot to the appliance. 4. To re-attach the foot to the appliance: place the foot on the floor, push the appliance down into the foot and then listen for the click that sounds when properly attached. www.BISSELL.com 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
Main´n°ce & Care
Cleaning Hose Tube
1.
Grab bottom end of the hose and pull
lower portion away from the body.
2.
Seperate the hose into two pieces.
3.
Wash hose and wait for it to dry.
4.
Align the top of the hose to the groves
on the hose opening of the unit.
5.
Twist hose down to insert lower portion
of hose to the unit.
6.
Make sure hose fits tightly into the unit.
Cleaning Foot of Unit
1.
To clean the foot and bristles, push the release
button on the back of the pivot joint and pull the
foot to release it from the appliance.
2.
Wash bottom of foot and bristles with
cold water.
3.
Look for any clogging in the steam nozzle.
To clean, run water over steam nozzle.
NOTE: Make sure foot and bristles are dry
before attaching the foot to the appliance.
4.
To re-attach the foot to the appliance: place
the foot on the floor, push the appliance down
into the foot and then listen for the click that
sounds when properly attached.
WARNING
To reduce the risk of electric shock, turn power switch off
and disconnect polarized plug from electrical outlet before
performing maintenance or troubleshooting checks.
2.
1.
5.
6.
3.
www.BISSELL.com
13