Bissell Trilogy Vacuum 81M9 User Guide - Page 15
TurboBrush, Tool maintenance
View all Bissell Trilogy Vacuum 81M9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Maintenance and care TurboBrush® Tool maintenance NPeot tTeu:rMbooBdreulsh8®1MTo9o-1l acnodmfeosllowwiths the same 2. maintenance instructions. 1. Turn power OFF. Unplug vacuum cord from electrical outlet 2. Twist collar so opening is at the top and lift top cover to remove 4. 3. Remove the brush from the drive belt to clean debris. 4. Reposition the drive belt on the brush, and place ends of brush in slots on the side. 5. Reposition top cover making sure to line up inside tab at the front with the opening 5. of the cover. Twist collar until opening is at the bottom to lock into place. Tip: TurboBrush® may not be turning due to loss of suction. Refer to page 14 for checking and clearing clogs. www.bissell.com 15 800.237.7691
www.bissell.com
800.237.7691
15
M
aintenance and care
TurboBrush
®
Tool maintenance
Note: Model 81M9-1 comes with the
Pet TurboBrush
®
Tool and follows same
maintenance instructions.
1.
Turn power OFF. Unplug vacuum cord
from electrical outlet
2.
Twist collar so opening is at the top and
lift top cover to remove
3.
Remove the brush from the drive belt to
clean debris.
4.
Reposition the drive belt on the brush, and
place ends of brush in slots on the side.
5.
Reposition top cover making sure to line
up inside tab at the front with the opening
of the cover. Twist collar until opening is at
the bottom to lock into place.
2.
4.
5.
Tip:
TurboBrush
®
may not be
turning due to loss of suction.
Refer to page 14 for checking
and clearing clogs.