Bissell Trilogy Vacuum 81M9 User Guide - Page 9

Operations Using the tools Attach desired tool to hose for above floor 2 cleaning surfaces or hard to reach areas. 1. Remove Hose: With vacuum in upright position, remove hose end from the suction inlet near the bottom of the vacuum by the wheel. Do not remove "tabbed" end of hose connected to the clear tank. 2. Attach tools by firmly pushing onto vacuum hose or extension wand. a. 2a. Dusting brush: Use brush side to dust furniture, blinds, lamps, shelves, and baseboards. 81M9 model only. 2b. Crevice Tool: Use in tight narrow spaces b. 2c. Extension Wand: Use with desired attachment for longer reach. c. 2d. TurboBrush® Tool: Use rotation brush action for small flat areas such as stairs,and furniture. Press gently down d. and pull towards you in raking motion, too much pressure will cause brush to stop rotating. NwOitThEt:hMe oPdeet lTu8r1bMo9B-r1uscho®mTeosol and follows same operation instructions. e. 2e. Pet Contour Tool® (Included with 81M91 only): Use to reach into corners and edges on stairs as well as armrests and other curved surfaces. The tool can be flipped to use in any direction. www.bissell.com 9 800.237.7691