Bissell Trilogy Vacuum User Guide - Page 6

Assembly Attach OxyPro®/OxyPro® Pet holster 1. Locate the bag that contains OxyPro or OxyPro Pet holster and can. 2. Attach holster to left side of vacuum (when viewing from front) by lining up the two tabs on the back side of the holster with the two openings on the vacuum. Push holster down to lock into place. 3. Place provided can of OxyPro/OxyPro Pet into holster. Follow instructions on page 8 for OxyPro/OxyPro Pet application. Operations Power cord To store power cord, wrap cord around upper cord wrap and lower extension wand support. Use clip on the end of the plug to attach plug to the cord. To release power cord, rotate the upper cord wrap down and gently pull off cord. Power Cord Wrap Power switch The power button is located just below the handle on the right side of the vacuum when viewing from the front. "ON" (I) "OFF" (O) Note: Rotating brush will not turn on unless the unit is in reclined position and brush switch is on. Brush ON/OFF switch Power Switch Brush ON/Off Brush ON/OFF is located just below the Switch handle on the right side of the vacuum when viewing from the front. Push the rocker switch ON- (I) to turn brush on Attention: for most carpeted surfaces, when "ON" Some Frieze carpets have long the brush will start rotating when unit is delicate fibers or threads that in reclined position. Push rocker switch may be damaged by the rotat- OFF - (O) to turn brush off for bare floor ing brush during vacuuming. It is cleaning or other delicate surfaces. recommended the rotating brush be turned OFF when cleaning this type of carpet. 6 w w w. b i s s e l l . c o m 800.237.7691