Blendtec Professional Series Owners Manual - Page 14

SECTION 6 OPERATIONAL OVERVIEW 6.1 MAIN POINTS OF OPERATION 1. Turn on the main power switch located on the front of the blender motor. 2. Place the blender jar on the base, making sure the jar is secure. Attach the blender lid. 3. Press the desired touch pad button once. You may press any button on the lower row to stop the cycle. 4. When cycle is complete, remove the blender jar and serve. 6.2 AUTOMATIC CYCLE OPERATION The Blendtec Connoisseur has blending cycles for ice cream, frozen yogurt, ice crushing, milkshakes, soups, syrups, fondues, sauces, dips, dressings, batters, whole juice, and smoothies. These cycles have variable speed settings that will change during the course of the cycle. This allows the blender to draw the contents into the blending vortex, which creates the desired texture. The blender will run its pre-programmed cycle and automatically shut off. If at any point you want to stop the blender before it has completed its cycle, press any lower row button. Note: The speed buttons allow you to control the blender to operate up to 10 speed settings. Simply press the speed up button and the motor will begin. Continue pressing the Speed Up key to increase the speed, or press the Speed Down key at any time to decrease speed. Once you have reached the desired speed, release the button. Once you press a speed button, the blender will begin to run the selected speed, then shut off after 50 seconds. To stop the cycle before the 50 seconds, press any button on the lower row. CN-11