Blendtec Professional Series Owners Manual - Page 5

1.8 NEVER OPERATE THE BLENDER USING ATTACHMENTS NOT SOLD BY BLENDTEC The use of any unauthorized attachments may cause fire, electric shock, and/or injury and will void the warranty. 1.9 CONTAINER MUST BE PROPERLY IN PLACE WHILE APPLIANCE IS OPERATING 1.10 BLADES ARE SHARP! HANDLE CAREFULLY! 1.11 WHEN BLENDING HOT LIQUIDS, REMOVE CENTER PIECE OF LID 1.12 POWER CORD PRECAUTIONS • NEVER operate with a damaged cord or plug. (If the supply cord is damaged it must be replaced by the manufacturer, or authorized service agent to avoid a hazard • DO NOT permit the cord to hang over the edge of the work surface. • NEVER use an extension cord with the unit. • Unplug the blender motor when not in use; before changing blender locations; or cleaning. 1.13 NEVER ATTEMPT TO REPAIR THE POWER UNIT Never remove the blender motor cover. The blender motor does not contain selfadjustable or serviceable parts. A qualified service agent must make all service adjustments. Removing the cover or attempting to service the blender will void the warranty. 1.14 TURN THE POWER SWITCH OFF WHEN NOT IN USE The Power Switch (ON/OFF switch) is located on the front panel of the blender motor cover. 1.15 AVOID TOUCHING THE BLENDER DRIVE SOCKET AFTER EXTENSIVE USE. The blender drive socket may become hot after numerous cycles. 1.16 CLOSE SUPERVISION IS NECESSARY WHEN APPLIANCE IS USED BY OR NEAR CHILDREN. 1.17 THE CONNOISSEUR IS INTENDED FOR HOME USE ONLY! ANY USE OF THE CONNOISSEUR FOR COMMERCIAL PURPOSES VOIDS ALL WARRANTIES. SAVE THESE INSTRUCTIONS CN-2