Bosch DB24C4200R2 Operation Manual - Page 62
Automatic Display of Incoming Alarms, XNOTICE
View all Bosch DB24C4200R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
62 en | Operation - Live/Playback Mode DiBos/DiBos Micro 5.1.2 Automatic Display of Incoming Alarms When incoming alarms are received, a red flashing tab is added to the device list. The cameras or remote stations in alarm status are shown in the device list and the images are automatically displayed. An audio signal sounds, if this has been configured. X By right-clicking the remote station icon, you can acknowledge the alarm, delete the alarm or display all the cameras in alarm status. Acknowledge alarm Delete alarm Display all alarms Acknowledges the alarm. The flashing tab becomes static. Deletes the remote station from the device list. Displays all alarms in the image area. The system automatically selects the best type of display. NOTICE! The automatic display of incoming alarms in live and playback mode must be configured. The incoming alarms are saved in the logbook. F.01U.033.372 | V5 | 2009.09 Operation Manual Bosch Sicherheitssysteme GmbH